Search:

I have a Milltronics Partner 1G Centurion V

I power up the machine and when trying to Home Machine it moves X axis erratic and Z drifts down till error 449 or 409,

I put together a webpage to...

Thanks guys for the input and all your help,

I changed both parker stackable valves which I purchased from controlled motion solutions in tempe,az comoso.com at $47 each, it came with new...

I found the valves local for $47
now I just am wondering about the solenoids which colud be the whole problem, they mount on top of the valves, hmm..

When making a tool change the tool holders have been hanging up, the problem started slow and progressed to where we cannot make any tool changes.

It seems like the air cylinder hasnt had enough...

I posted this reply along time ago, however it didnt actually post for some reason.

Thanks guys I cut back the wires and resoldered them and it fixed the intermittent nightmare of the E-Stop 450...

yes it does have the Custom Servo Drive/Motor, I took the fan off and motor cover. The original female side of the connector was removed, someone soldered all the wires directly to the male pins that...

Can anyone tell me what the 'Resolver' or 'Resolver Cable' is/or does and where I might look for it them?

appreciate your reply, I did notice today when the machine is powered on and the 'feedback' led is on located on the 'spindle drive box' the machine will go right into the 450 error, when its off it...

We have a 1994 Partner 1G Centurion V Mill that will randomly throw an E-stop 450 error.

We have called Milltronics and still havent been able to isolate the problem, we are looking for any kind...