Search:

Did you ever found a post processor , there is not much information about Alphacam post processors and commands to change the garbage the send you with the program , what they send you are samples...

thanks i will be change the post

did you find how to do it ?

looking at your pictures does not show any alarm on the servo unit what let me thinking if it is possible that is something else

i check my units the X and Y are 15 amps and the Z is 20 amps ...

where are you located ?
can you send me a private message with your number , we can talk with WhatsApp ?

any way for what you are telling me looks like is the servo unit , even that the thermic...

please explain me the alarm is on all the time or the machine is running and you get the alarm , if you live the alarm for 5 minutes and hit reset clear the alarm ?
if it is on all the time could be...

As far as i can find out according to the technical service support there is no way to do the groove at an angle , i have a part with a grove on a 45 degree and this program can't make it hope they...

I have alphacam 2021 , i need to make a face groove in 14 degrees angle and i have 2 issues

1- the tool is 14 degrees tilt so i need to get the tool path 14 deg. to avoid crash

2- the...

under geometry tab select edit list geometry , you can choose the geometry point to change

I have Alphacam ultimate i need help on how to engrave, machine on the diameter ,cylindrical machining (radial ) my machine use code G107

the process i did was make a round surface on the...

Jim Dawson is wright try to use ETL they also handle the CE certification so they know exactly what should be change to comply with UL and they are a lot cheaper
you may try a local electrical...

I have a matsuura mc 510v and i just loose all the parameters , does any one has a parameter list that can be email to see if i can put the machine to work

i bought that machine use and i do not...

I have 2 matsuura MC-510V (tiger) 1989 one of them start to give me an alarm 333 fuse Z , if i hit reset it goes away most of the time and i cant continue some times i have to turn off the machine...

End up that after the milling i need to activate G18 again , that solve the problem

i will try it tomorrow i let you know
thanks

i have a puma 240 and this one both has to have a comma before C when i use it as a chamfer and before an A to determinate angle
the tool N2 works fine until i run the N11
i activate the milling...

I have the following problem , on this attached program when i run the N2 for first time is working fine after i run the endmill N11 the N2 give me an error on the C ( chamfer ) i guess is because...

i have a similar problem on my puma 200 and was a small relay , i switched for the one that control the light and solve the problem but not light , i replace all of them, no more problems, was not to...

i hope i post it on the wright forum

I am buying a new machine and looking to insure that machine per financing request , does any have a suggestion for a company that insure only that machine ...

I need service manuals for DAEWOO PUMA 200B

Thanks

Darryl
do you have any docs on how to replace spindle bearings on a puma 200B
and besides the bearings and the oring what other parts are recommended to replace , the collar labyrinth has to be...

381118

NO the plate does not have the NRTL logo on it , i may believe they start after 2013

MACHINE : DOOSAN PUMA 240 2013

Does any know if this machine is compliant with UL

I need to make a UL certification on this machine , does any body went true the certification on this machine...

TANK YOU Norbert

I have 2 daewoo (lynx 200 and puma 200) with 18T control year 1989 and 2000 , and i use the following macro variables to set the offsets on the machine , i need to find out if the same numbers will...

check this thread may help you , if not post more info how do you get the alarm

Fanuc Alarm 2013, Programing Error

PUMA 240
When i am running the program this alarm " 2389 Q-SETTER SENSING ALARM " appears , the machine still running and the alarm goes away when reads M30

i know is relater to the q setter...

Doosan puma 240 Fanuc i series control

When i am with the teaching tool arm down ready to teach an id tool by accident press the home bottom (is next to jog) and the machine move fast and damaged...

SOLVED


YES is going into the O8000

I solve the problem i find out one keep relay was wrong selected on the type of bar feeder selected and increasing the dwell just to G4 X3. works fine
...