I think I made you a better one.
It's 9.5 outside dia.
with rings out to 8.5"
and down to 2"
All holes are 1/4"
I left the circle rings in the dxf, so if you want to add more holes
or change...
Type: Posts; User: The Inventor
I think I made you a better one.
It's 9.5 outside dia.
with rings out to 8.5"
and down to 2"
All holes are 1/4"
I left the circle rings in the dxf, so if you want to add more holes
or change...
He said the template was 7.4375... your dxf comes out at 3.400.
You can't have a 5-1/2" bolt pattern on a 3.40 disk.
Grandpa Bill
I think I would want the center hole about an 1/8" to maybe 1/4", so I
could use a transfer punch to center it on the part.
What do you think?
Grandpa Bill
Now that looks like a very handy tool.
How big is it? (DIA.)
Grandpa Bill
Here's another option I've found and it works good:
The ribbed/slit wiring harness tubes/sleeves used in cars/trucks.
I found several vendors selling it in 50' to 100' lengths and
from a 1/2" to...
Hey Guys,
I don't know how many have found this, but it's something you should
check out (and it's a freebie!!!).
Free 3D CAD Program
It's a fully functional 3D program and there is a ton of...
Hey Guys,
You want to check me out and see if I did it right.
"How to Build a Laser Edge Finder"
Part #1
How to Build a CNC Laser Edge Finder Part 1 - YouTube
Part #2
How to Build a CNC...
Thanks my friend,
That was the key I needed.... Now a 168ohm shows 2.2volts, so if I
can find a 135 to 150 ohms I should be right on.
Grandpa Bill
I think I've got all the parts needed, but I don't know why..... I've tried
580ohms to 7.8K in series and the dam thing still reads 5.01 volts every
time.
Grandpa Bill
Thanks Greg,
I do understand about the code .... but what tells Mach which code points to
the laser and the other points to the camera?
OH! Side Note: what is the code that turns on the camera...
Hey Greg,
I'm just now getting both a camera and a laser setup on my machine.
The camera is about 1.375" in front of the tool (+Y) and the laser will be
mounted on the side so it'll be about...
OH YEAH!!!
I go there and watch a lot of his vids.... (He's up to 106 now.)
Completely forgot about that one, till you reminded
me.... thanks ... I'm on my way.
Grandpa Bill
Dumb question part 2
Did the trace and it looks good
Saved as a png --- it looks good
Saved as a dxf --- Same errors and a zero bit file.
Teach me some more.... P-L-E-A-S-E!
(This is what I...
:confused: DDDDAAAAHHHH..... NO!
dumb guy...dumb guy..... brain dead old guy!!!
(chair) :withstupi
Thanks
Grandpa Bill
Hey Switcher,
Loaded in a jpg about 320x200 then every time I try and
save it as a dxf I get this error and it doesn't show up in
any of my cad programs.
Traceback (most recent call last):...
Shane,
Here's a video tutorial using Inkscape and Blender.
This might give you some ideas.
Inkscape and Blender
Now I'm confused???? (Which is normal for me)
Inkscape exports in png --- is that raster or vector?
Better yet which extensions are which?
I 'think' I've use VSO on every format --...
See if you can find a copy of "VSO Image Resizer"
you can change size and format in one step.
Grandpa Bill
Thanks Switcher,
You're on the right track with the video, now get it out of the case/
cut the size down, (Length)... then put it on wheels and we've got it.
I'll draw up something by hand an...
Hey Guys,
About a 100 years ago.... (well at least 5 computer crashes ago,
and of course I lost all my bookmarks.)
I've 'googled' my head off with no luck.
I saw a website where he made a...
Here in Wisconsin, when the electric company hooks up a new house,
they drive down 2 - 8 foot rods 4 foot apart.... But they dig a 3 foot
deep hole first! (Think it has something to do with the...
FYI: Just a little side tip seeing you'll be using this outside.
Get a 10 ft. piece of copper-clad ground rod, (leave about a foot
sticking up, so you know where it is and you don't hit it with...
Guys,
You've got to see this to believe it.
How about a 3D CNC Rotor/mini-Mill/printer
all made out of LEGO's!!!!
And it does beautiful work too!
arthursacek's Channel - YouTube
With it being almost a gig in size:
A) make it an ISO file(s).
(What a lot of people don't know is any zip program
can open them or they can be burned to CDs/DVDs
as normal.)
B) break it up...
Nice work -- but I'm wondering how many 'over-sized' customers
sink into the groves/slots??? :D
What does that covert to in "PSI's"
And was that an eBay find?
Grandpa Bill
After your finished cutting and Before you fold it up...
just get out the air hose and blow it off.
If it was inside --- go with the water tank.
Grandpa Bill
FYI: Next time turn up the mike.... couldn't hear a thing.
Not really... just rebuilt them every year, (Ran a welding shop for 25 years).
Amazing what a snow plow can do to a JBoat under a snow bank!
"OUCH!" :(
The cost of sheet alum./angles/channels...
You don't say how wide or how high?