Chris,
Here's a 3D clipart file you can use if you have Aspire. Here's a couple of pics of a chair I made using it. The seat on the chair is slatted because it is going to be part of an outdoor...
Type: Posts; User: Odie9
Chris,
Here's a 3D clipart file you can use if you have Aspire. Here's a couple of pics of a chair I made using it. The seat on the chair is slatted because it is going to be part of an outdoor...
I have mine wired as normally closed (NO) for just that reason. Then if the connection is broken anywhere you'll know immediately.
Odie9
I just switched over from emc2 to Mach3 and set it up with Bug Ted's modmig works great! The auto z function was actually the reason I made the switch. One question though. Is there a way to set it...
That's odd, does this one work?
Odie9
Thanks for the info, I'll search it out.
Ok, I thought that might be the issue, I'll ground the hose tonight. Should I run an earth ground to the metal project enclosure that the G540 is mounted in as well?
I have a recently completed Joe's 2006 build. I have been running it for a week with the G540 sitting on the floor with a jumper between 10 and 12. This weekend I mounted it in a project box with a...
Attached are my config files. If anyone can help sort this out it would be great. I just put together this sample machine config to try to get it to work before I alter the config that I actually...
yes, I clicked on the mdi tab so I guess I'm in mdi mode. Nothing happens when I push the button. I'll attach my files tomorrow.
This us probably a dumb question but how do you change to mdi mode?. I'm running the Axis GUI.
I'm trying to set up a probe and running into an issue. I have the files loaded up and configured correctly I believe as I have the custom buttons displayed as described. When I hit the touch off...
Gerry,
Will a 24v 20amp power supply power the g540 and 3 of the 381 oz/in motors? I already have a Mean Well SP-500-24 power supply.
Odie9
Awesome, thanks again for the advice.
Odie9
Gerry,
Thanks for the reply. Are these the motors you're referencing? NEMA 23 Stepper Motor: KL23H2100-35-4B
I was kind of coming to the g540 conclusion today as well. Keling has them on sale...
I'm building a Joe's 2006, slightly modifies to use some parts I already have on hand. I'm looking at the HobbyCNC 305 oz/in combination and also at the Keling 425 oz/in. combo.
I'm not opposed...
I'm building a Joe's 2006, slightly modifies to use some parts I already have on hand. I'm looking at the HobbyCNC 305 oz/in combination and also at the Keling 425 oz/in. combo.
I'm not opposed...