Search:

Hi Bip,

below is a backup of my parameters, I hope that will be the same for your machine as well. As far as I know, they are mostly all the same hardware and machine options. These are old,...

Finally we run ROBOBAR - with the help of TORNOS service.
Parameters I got and manually entered, but they are useless without software that can be installed only with a special flash memory card...

Hello,

I own a machine TORNOS Deco 13a with bar feeder ROBOBAR SSF226.
We have one problem, so if somebody are willing to help us somehow or point me to the right address, I would be very...

Hi Alex,

I will try today to change this parameter , and here is the original parameters that I received on a floppy disk with the machine.
Some of the parameters in the machine that are...

I added the parameters that are currently in the machine, if someone can conclude something from them.

Hi all,

I bought a machine QUASER MK60IIH with system FANUC 18-MC.
I have a problem with stopping x, y and z axes.
When I running one of the three axis in JOG, HANDLE or MEM mode happens delay ...

Today I finally got the original parameters of the manufacturer Hardinge.
How was I happy ... but not for long ....
First I deleted all parameters.
Than I once again inserted the optional...

Thank you Lewertek because you corrected me.
Yes, it's only a Hardinge Conquest 42, I have two CNC lathe HARDINGE Conquest T42 with fanuc 18t system.
I accidentally typed T.
Thanks again.
I...

Hi all,
I still did not find these settings, if you have someone who has the optional parameters of 900 to 920 would like to send them to me. Machine I still can not run.
thanks

Hi all

Hardinge Conquest T 42 FANUC 0T system.

I need the optional parameters 900-920. If someone has the same type of machine with this system I would be grateful to him to send me.
...

Hi,

send me your mail address, I will send you everything I have for this machine.
Boban

Hi,

the problem is still present here!
how to check with certainty that the memory disk (FR) is faulty.
I have another machine Okuma LB 15 but system is OSP 5000L , so I can not test my card...

hi Superman,

I already tried all that, pulled out all the cards one by one. I even heated them in case that the card has a cold solder. nothing has changed.
The battery is good.
I just tried to...

Hi All,

We have a OKUMA 1995 LB-15II with a OSP 7000L controller.

When I try to start machine, OSP 7000l SYSTEM LOADING and always appears ALARM

352 ROM MEMORY DISK WRITE ERROR
...

I need help. I have a machine MAZATROL T32-2 MAZAK FLEX-15 with German language. Does anyone know which parameter switches system to English.
thanks,
Boban

I need help. I have a machine MAHO MH 432 CNC 700C with the German language. Does anyone know which parameter switches system to English.
thanks,
Boban

No, not at all, because parameter 2205 does not have 7 bits!
Boban

Hi
Today I succeeded in to switch the language to English.
Parameter is 9126 bit 2
but I had to do a change in IPL Menu in hex ​​format
To change option parameters you have to load them in hex.
...

Thanks for the reply, currently I am not able to try this on a machine, a weekend is not working. On Monday I will try and I will write the result, thanks anyway.

I have a machine with FANUC control 11 which is in German. Does anyone have optional parameters for FANUC 10/11 or if someone knows the exactly parameters I would be grateful to him to send me on pm...

And if the machine does not drive to the reference point does alarm appears?
Try to power on the machine and not doing anything 5,10,15,20 minutes.
This alarm usually appears if the pressure switch...

Thanks for your reply Suleman, but I doubt that the power unit is defective, because before the transport machines worked properly.
And please not to get angry but I do not like advices from the...

Thanks Bill for this excellent explanation, tomorrow I'll try to rewrite the program, and also to try that with changing parameters
Thanks again,
Boban

Hello!

I bought a few days ago CNC lathe ANGELINI
model: TORNIO CNC
type: OSCAR.
system FANUC 18I-TB

When I connected the machine, there was 12 alarms:

1002 not out

Hello!

I have a problem with the code G75 on the machine Takisawa TC-3 with the Fanuc 10 system.
The program is already used on the machine Takisawa TC-3 with system
Fanuc 0 and worked without...

STILL NEED HELP ON THIS PROBLEM. PLEASE!

Hello,

I write you in hopes that you will help me to solve the problem on machines MATSUURA MC-510VG system YASNAC300
Sensor is not able to find the first tool . We are old sensor replaced with...

Hi All,

We have a FEELER fv-600a with a fanuc 0m control system. It has been switched off for a year or so and the battery has gone flat and it seems all parameters have been lost.

After...

.

Please can anyone tell me where I can get THE DATA TABLE: KEEP RELAY,PC TIMER PARAMETERS and COUNTER SETTING FOR A HARDINGE CHNC II+ SYSTEM GE FANUC 10T,I have a copy of everthing else but these...