Search:

Hie. There are no alarms on the Spindle module not on the servo module. The control is Fanuc OT. Yes l wired it up correctly. The machine is not in eStop. Am going back to the workshop on Mon January...

Recently changed my servo module. Now the spindle module is is not getting ready. Meaning the spindle motor is not getting excited. How can overcome this problem. Thanks in advance

Sent from my...

Alright thanks a lot. Do you have the boards in your stock?

Sent from my itel W5001P using Tapatalk

I also have the same problem.
Any one who can advise on how. To resolve this issue?

Sent from my itel W5001P using Tapatalk

The motherboard is a fanuc OT.



Sent from my SM-T217S using Tapatalk

The procedure that l used is as follows:
Press reset + delete at the same time snd turn on power to clear memory.
Press E stop btton in.
Get into MDI mode.
Input the dpecisl setting parameter,...

http://uploads.tapatalk-cdn.com/20161203/86403cf75305c5f5bec48510849270af.jpg

Sent from my SM-T217S using Tapatalk

Hello
I can assist you in fault finding on your screen. Turn power on and check if if you are getting 24VDC on the power cable supplying power to the screen. If you are getting the 24VDC then your...

Hello everyone.
I have just changed the motherboard of my Fanuc OT series lathe which was malfunctioning. I have the parameters list. Need assistance on the procedure to follow when inputting the...