May I have the plans, too?
[email protected]
Thank you very much.
Tan
Type: Posts; User: EverythingCNC
May I have the plans, too?
[email protected]
Thank you very much.
Tan
Would any member please post some pictures of the ISO 30 Spindle?
Thanks.
Tan Ta
Does anyone know the gas composition of a sealed CO2 laser tube?
Hi.
Does anyone know how to refill a sealed CO2 laser tube?
Hello.
I belive that Digit-Keys does refill Synrad tubes. Please check them out and share your experience here with other members.
Thanks.
Tan Ta
I think you can run into problems trying to cut wood with a DIY waterjet. I can punch a hole through 0.5 mm thick of most metals easily using a micro sandplaster with 100 micron aluminum oxide at...
Ballscrewed,
I am glad that I can share the information I know with you and everyones.
Back to stretching problem with the cable. I hung a 3/16" multistranded steel cable a little more than 10...
WayneHill,
I think McMaster sell Thomson screws. I believe Nook has polished screw which can be more precise. Have you bought ballscrew from them?
Dongle,
Where are you?
US has no problem with shipping. I bought 8 foot 1/4" brass, aluminum rods through mail order and they came straight. They were shipped in hard cardboard protective tube,...
Aaron,
I found two sources. I think homeshopcnc can machine the end for you.
http://homeshopcnc.com/page2.html
Or, go to mcmaster.com and search for ballscrew. The 5/8" screw is $1.27 per...
Hello DennisCNC.
Maybe a matching ballscrew with motor setup, you can even move it when you are on vacation.
I saw a plasma cutter at a friend's shop over the weekend. It has stepper motors. In my opinion, right sized steppers will work fine for plasma table. There is no load other than fiction from...
Does anyone know who has good price for Nook ballscrew?
Thanks.
I have a Roland MDX-15 and it uses cable, pulley, drum system. I did some testing with the idea for a larger router, but the cable sagged and stretched too much. I think, it works fine for 12-15"...
Wow! Can the weight tip the mill over? It seems to me that 165lbs, hanging on the back, is a lot for an X3. It will weigh more when it is moving. Should the pulleys go to the ceiling?
Hi.
I have a Roland Modela MDX-15. If I can be any help, please let me know. For spec., you can check it out on roland's website.
Since the RF31 is not a good mill to convert, would the RF45 is a mill to convert to CNC?