Search:

for win 7 also u have to enable the FTP in IIS settings. after that u can transfer the files thru FTP.

this is problem is comming only when machine is stopped at the time of tool change.

you have to take z axis down. after that this all alarms are get reset.
make keep relay k10.7 to 1. and take z...

you can interface it..

for FANUC alanog spindle drive you have to give ready singnal, SFR, and analog voltage for RPM..

i have the data back up of mori sl-25 but the controller is FS-15
i dont know PMC parameters for system 15 and 10 are same or not....

if you want the data then contact me on [email protected]

if not ready is comming at booting screen means your systme hard ware is failed for FANUC 0TTC controll.

You can find 4 system PCB inside ur electrical cabinet. removed i/o board and power on...

hello.......
i am also facing same king of problem in FANUC syatem 15TA mori seiki SL-25 machine.
ex 451 spindle drive unit fault is shown in PMC alarm screen.
this problem is comming after clear...