Search:

Underthetire--that's odd, the Sabre VMC 1000 with Acramatic 850SX has been our workhorse and still holds very nice tolerances and finish compared to our Tree, Kondia and Mori's. The machine is very...

Has anyone gone ahead and attempted to have PLC Center repair the 850SX keyboard per the $117 quote? I'm just about dying here to find out if this is a bonafide quote, or just a simple...

Cincinnati/Siemens developed a full-blown communications software program referred to as dcdnc. Full up, download, unlimited drip, etc. As you've found, the protocols for the 850SX are a bit odd...

Thank you so much. That's exactly what I was looking for. Wow, pretty powerful language. Also pretty complex. Very helpful to have the manuals.

Anyone have an example of a PLC program to...

Yes, thanks, I'm familiar with the Ajax website and forum.

Unfortunately, there's only one or two posts discussing programming PLC logic. There must be some manual, guide, something available to...

What documentation is provided or available for Ajax's PLC language/programming for their Centroid softare?

I noticed there isn't any documentation for PLC programming in the Operating or...

I'll try that. And thank you for the reply.

Trying to get Edgecam to work with Solidworks files. Edgecam works fine when you create an object in it. Generated code is good, etc. But when a Solidworks file is loaded and milling function...

Start by checking your line voltage. I had the same problem and it turned out to be one low leg of the three phase power. The Z Axis uses the most power so shows it first by stalling and then...

Cincinnati didn't go out of business, it was purchased by Siemens. The Saber I we have is extremely well built, with 10k rpm chilled spindle, 1000 ipm rapids from AC sinusoidal Fanuc drives, and...

I'm trying to find a servo/stepper motor to match a stand-alone Yuasa CPNC-500 Rotary Controller (Indexer). The drive inside the unit is labeled Sanyo Denki Pentasyn, model PMM-BA-5641-7, Serial No....

Thanks for the input Mike,

Both issues are solved. Outputting block numbers in Edgecam requires more than just checking the boxes off in the required fields. Its necessary to place "[BLKNUM]" in...

1. For some odd reason Edgecam (v. 9.75) converts some of the Z rapids to “maximum high federate” moves. Not all the time, but the majority. I’ve been through the cgd file in Codewizard and checked...

The MAI software is the operating systems, much like Windows for our PCs. If the 850SX passes startup checks, but hangs on "initialising MAI," the possibilities include:

(1) The MMC (main memory...

Siemens provides a specific DNC program for the Acramatic 850/900 controls called "DCdnc." I think its up to version 3.2. Its a terminal program that includes drip feed, file transfer, etc, from...

Just a suggestion, so take it with a grain of salt, and I'm not sure if its even feasable per Rutex's current product offerings/development path. But, I'd rather see a joint development effort to...

For what its worth the "Run Test Profile" section of Rutex's R2000 tuning software identifies all three methods (Rectangular, Trapezoidal, and Sinusoidal; see the attached link). But again, its in...