Search:

Hi Folks
I have a 2002 Morbidelli A504 with NUM1040 controller.
The handheld pendant has been dropped a few times over the years.
Anyone know where i could get it repaired?
Maybe someone has one...

Hi Lukas

The 11M is going back a few years :)

In general any code you feed to the CNC using the DNC function must be directly executable i.e. no subroutines or calls to external data. Secondly,...

Are there any error messages?
You might have a short circuit on one of the inputs from x0.0 to x3.7 that is dragging the whole group down. Try disconnecting them byte by byte

Hi William,

Please contact the service dept. at SCM Italy directly:

[email protected]

They don't seem to like sharing the information with third parties like me.

Quote the machine...

Hi Luix, Hi kingoblete,

We would love to hear the solution, please share - thats what CNCZone is for!

Sounds like the communication chip called UART has failed. Contact your nearest NUM office

Hi Ambrosio

Did you get the machine running. coc9 is correct. If you give us the machine serial number (usually on a silver plate on the side of the electrical cabinet) we can get the information...

Hi William,

Can you send me a photo of the machine ID plate with serial number etc.
It should be on the electrical cabinet. Also please send a few photos of the inside of the electrical cabinet....

Hi Matt,

Sorry for the late reply. I would recommend AlphaCAM if you are making a lot of one-off kitchens

If you find that you are making similar parts (carcass gables for example) with varying...

Make sure you dont use a windows editor when editing & saving the files. Use something like notepad++ and save in a text only format like unicode

Hi KJ
Did you get this problem solved?
Louis

Hi there,

I know I'm a little late but have you looked at the X axis drive?. When the machine is in Estop, and you push the x axis by hand, does the position count correctly on the screen? Have...

Hi Tony,

Is the PC handshaking via the serial cable? I seem to remember the CC100 is fairly sluggish even a low baud rates, and will pause transmission (by setting CTS low) until it processes the...

Hi There,

Did you ever find a solution? You could type the program on a PC using Notepad and then convert the txt file to binary using the morbidelli converter program CNVRT.EXE
The .PGM which is...

Hey Paul did you ever get this sorted. Am in Tullamore if you need me

Any cadcam system will work but you must convert the txt file to binary using a morbidelli utility called xiso. PM me if you want a copy. There is no license so nothing illegal in sharing it

Kluber grease is only necessary for the drilling spindles. Any good semi liquid grease (viscosity grade 00) will do for the ballscrews and linear bearings

Hi Stairgod

Will be in Calgary in about a week (when I finish in Mexico - cant be more specific) looking for work and can drop by to have a look if you want. No foal no fee. I have retrofitted...

Hi Keelhauled,

As you have discovered, sending CorelDraw files to AlphaCAM is a nightmare, but all is not lost. When you open in V7 and convert from splines, turn on ghost tools to see how many...