I would leave off the G21. I would use G0 and not worry about a feed rate. If only checking for motion, any noticeable motion would do. From my experience with the Woodpecker controller and real...
Type: Posts; User: BobHarper
I would leave off the G21. I would use G0 and not worry about a feed rate. If only checking for motion, any noticeable motion would do. From my experience with the Woodpecker controller and real...
Be sure you if you have homing of the axis set up that they are homed. If you have limit switches on the axis to determine end of stroke, you should be able to home the axis. There is a homing...
Glad you got the device to work. It is so much easier to use a flash drive than a floppy.
On some CNC's, there are M codes that will send a signal to a connect device. That device can be an indexer or whatever, but it has to have its own control. Once it accomplishes its function, it...
If your using G91, then prior to line N5030 the tool needs to be positioned on the arc. Line N5030 would be G3 X0 Y0 I-.36 J0. Realize that I is saying the arc center is -.36 from the X cutting...
The E series control with the exception of the European models can read a flash drive in MS-DOS format and OSP format without problems. We have a Slovic machine with an E10M that still shows MS-DOS...
You treat the emulator as a floppy drive. On the EDIT screen you will copy the file to the device FD0: There is software on the web to format a flash drive to be divided into a lot of floppies....
If you take the screw out of the case, you will see that it is a NiCad battery about the size of a AA battery. I think it is around 1.5v, but I'm not sure. It's been awhile since I have replaced...
If you are losing parameters on a OSP5000, replace the battery. It is inside a square metal case. It's about 3/4" square and about an 1 1/4" long. It should be on the board in the power cabinet...
On an Okuma control, Q has several representations.
It is used for the number of calls for a subroutine. CALL O10 Q2
Here is an example of angular increment: ARC X0 Y0 I2 J0 Q45 K8
Another is...
Just in case you haven't found an answer yet, can you contact your Esprit rep and ask them for a post? If you don't have a maintenance agreement with them, though, they may not help you. Anyway,...