I am drilling 304 Stainless with a 7/32 Diameter Drill 3 and a half inches deep. I am totally struggling, breaking multiple tools. We first tried 1350 RPM and 5.2IPM plunge, then tried 450 RPM at 1.5...
Type: Posts; User: ColbyGore
I am drilling 304 Stainless with a 7/32 Diameter Drill 3 and a half inches deep. I am totally struggling, breaking multiple tools. We first tried 1350 RPM and 5.2IPM plunge, then tried 450 RPM at 1.5...
Hello, I am a student worker at my local university and we just invested in a Tormach 8L Lathe with various tooling; however, there isn't a consensus knowledge base for Lathe Tooling. Therefore, I...
I have been pecking the drill bit through the 3-inch section of copper. I have come to the conclusion using a drill press might be best, but I would appreciate others input.
For reference, I am a student worker at the local college with what I would expect to have the skills of a semi-skilled hobbyist. Also, I am using a Tormach 1100MX, Fusion 360, and a drilling bit...
I am a student-worker at the local college, and we recently installed an HP Latex Printer, great system; no complaints. However, we also installed a Titan 3 Vinyl Cutter in conjecture with the...
I am using a Tormach 24r. I have tried multiple way to set my G54 to the top of the stock in the PathPilot software, but it always displays that the machine would surpass the Z threshold. (The stock...
Hello, I am an overall machining noob, but I am trying to machine this drawer bay. I have the x & y coordinates set to 0,0 for the back lefthand corner, but the Z coordinate has given me several...
Can you please send those attachments a second time, they are giving me error messages now?
Hello, I am a total newbie to using the PathPilot Software, but I am attempting to use Fusion360 to manufacture some drawers for the local innovation center. When using PathPilot to simulate the...