Search:

We bought this old HBS-12A automatic bandsaw. For few weeks it was working fine and then a problem appear. It will not push material in automatic mode. Head of the saw will rise and nothing happens....

Hello welders
I need your help!!! I want to make brackets which will have 1095 spring steel 0.032" thick sandwich between two pieces of .125" thick cold rolled steel. What is the best way to join...

That's what I did on my CNC router. But I don't want to use any software. This will be simple device that will spin a item so I can wind some rope around it.

Alright folks. I need to build a system made from two steppers motors that will be mounted opposite to each other and rotate in same direction (first motor have to rotate clockwise and second...

Do you think it will put me in the ballpark with the torque required to compress? So I can get right motor and not overpay?

Is there a tool I can use to measure the torque required to turn the screw under pressure? Something like a torque wrench?

Okay. So to control everything without PC. I need one of the kits above and the stepper speed control?

Something like this should work DC Stepper Motor CCM2 Generador Controller Module Reversible Control for DIY Project-6.45 Online Shopping| GearBest.com

Jim I was thinking about stepper motor also. Just was not sure what size. What kind of stepper controller do I need? I need the motor to be able with press of a button to spin forward and reverse....

Jim thank you for the reply. The thing is this will be an addition to a product that is already made. I need to take that route. The press is already made and it is powered by turning the handle by...

Hi folks
I need help with picking a motor to do the task I need. Motor will rotate a 5/8-11 screw which will move adapters to compress material with about 300lbs force. I will use timing belt and...

I'm looking for a CAD plugin which I can place on my website so customer can upload his Solidworks or Inventor 3D model and get a instant quote. Something similar to this https://www.plethora.com/

I would like to use one of the stepper motors to control a ballscrew. Here are the things I will need to use it:

1. Control Speed of the motor
2. Control the steps. So if I press a button forward...

Not sure if you guys have seen a winch like that but you can check it here Dutton-Lainson Winch with Automatic Brake . I would like to know how that winch works? Is it generating heat and this make...

Hi
When I start my spindle sometimes you can hear it running but it won't spin. Other time it will start spinning right away but counter clockwise. And sometimes it does start correctly by spinning...

295962

Hi guys
Trying to machine a custom part and cannot find a best tool to do it. Check the attached image. How do I mill the radius on the bottom of the stud in red rectangle?

Hello
Our company is SunnySideCNC LLC . We specialize in cnc milling. If you need anything contact us at Sunny Side CNC LLC
Thank You
Kris

Do you know what is the tread size of the hose connector? I might buy one that will fit bigger tube.

You were right. I lifted the container up and it start flowing. It looks like the container must be almost at the same height as my spindle.

Hi
I connect the clear tubing hose to my chinese spindle and pump. Don't know why water won't flow. I tried without the spindle and the pump is working great. It won't work with other pump I have...

Anybody is interested to purchase used SuperPID router speed controller? It have broken speed sensor. But the unit works great. Just need new speed sensor. I already put it in case. Not best looking...

I know it's took me a while but I was very busy with my new product and family. Here is the screenshots of text messages we exchanged with Darin Neagle aka "vwfullcup" or "Speng Engineering" or...

Haha this is funny guys what I find out. The motor I was using to test was the only one that was doing that. So now my machine is back and running. Thanks for all the help.

Yes definitely I do. That's how my table is set up. Bed itself is longer the the bearing rails so I can use that front space. So basically it all depends on design. Still no matter what method you...

I agree on centering the spindle between the bearings but on travel size it still stay the same because you move spindle back which takes the travel distance from front. So no matter what you do ,...

Can it be that all the cables are running in one cable channel?

Also here is a photo of my new control box

272360

Gerry you can check new video here:https://www.youtube.com/watch?v=NshM9yYUwpU&feature=youtu.be as you can see on the new video the spin direction changes even if I use the same button for the motor...

Forgot to mention I add C41 board to the system also. I'm not sure if you saw my video , but in it you can see that the motor won't spin at all. Now I disabled all the inputs (home switches) and it...