You can find here the attached picture of the machine:
Type: Posts; User: yasser72
You can find here the attached picture of the machine:
Yes Sir, the water is mixing with oil
Machine name is: Tecnocut made 2004
Material: all types of steel, marbles or tiles or wood and cardboard up to 200 mm thickness
Mode of failure: low pressure is not functioning
@KilrB thanks for your reply Sir
it's a waterjet cutting machine from cms technocut, it's a 2005 model..the problem that I'm dealing now is that emulsified oil and the low pressure is not working when I'd switched from high pressure...
is there anyone know the solution why the Low Pressure is not working?..
Just recently i have a problem with my waterjet machine because the low pressure is not functioning and the oil is mixing with water..any advise for this problem?.
Thanks a lot Sir for your comments and God bless
when we opened the wear cover of the x axis we'd just found out that the micro switch is not functioning properly so this might be the cause of the problem,we will try to change it and we will see if...
Sir i'm using a waterjet cutting machine and the problem is the zeroing because the x axis seems like no control of the machine,it always hit to the left side end of the machine
it seems like the x axis has no control because when i make the zeroing procedure it hit to the left side end of the x axis
when i make the zeroing procedure the x axis is hitting ot the left side end of the machine
when i make the zeroing the x axis is not responding and it hit to the end of the rail
i have a zeroing problem with our watejet machines,is there any body who's willing to help?..
i am having a problem with the x axis of our water jet machine because when i put the command X1000 it came out shorter than the value that i'd put,when i measured it using the ruler it only came...