More general resources and info :
https://cnc.zone/kb/tutorials/tutorials
Acceleration and speeds:
https://cnc.zone/kb/tutorials/essential/how_set_speed_and_acceleration
Type: Posts; User: PlanetCNC
More general resources and info :
https://cnc.zone/kb/tutorials/tutorials
Acceleration and speeds:
https://cnc.zone/kb/tutorials/essential/how_set_speed_and_acceleration
I now know that you are using floating head for plasma cutting but not much more. You need to give more information if you want good response.
I use G65 P120 macro in postprocesor...
"Measure Height" command is used to measure work offset. After measurement machine goes to height it was before measuring.
This is usually done before you start program so I'm not really sure what...
Do you have filter and/or isolation transformer for your servo driver? Check your driver user manual.
Opto isolate encoder from controller, use good power supply for encoder and properly shielded cable. Make sure you use high speed optocouplers.
Offline jogging is currently not possible with TNG software.
Export your profile and send me .zip file. Also send me g-code that you use.
Do you have old software version?
G76 is supported in TNG.
Here is example g-code:
(dlgname,Thread)
(dlg,Position Z, dec=3, def=0, min=-10000, max=10000, setunits, store, param=posz)
(dlg,Position X, dec=3, def=0, min=-10000,...
But perhaps more programs now use INSUNITS property.
I'll implement automatic unit detection based on this property. It is trivial task.
This is what I'll do.
switch...
Some programs use $INSUNITS property (like BricsCAD) for units but this property is actually used for something else. ...
If you don't believe that doesn't make it true. DXF is unitless and that is a fact.
DXF files are "unitless". They do not contain any units.
When importing user must choose Metric or Imperial units and correct Scale factor...
Mastercam was tested with one of its built-in post.
https://planet-cnc.com/how-can-i-configure-mastercam/
Parameters for this will be in next version.
So you did nothing ? Then your settings are still wrong! Why would you expect different results?
Here is solution (again): ...
Send me your last profile .zip file and I'll check your settings.
For correct limit switch configuration read here:
https://cnc.zone/kb/tutorials/basic/how_to_connect_and_set_limit_switches
That gcode is complete nonsense. If it worked it was due to pure coincidence.
I see zou dont understand it but you want to argue with me. Im here to help bur if you dont want it suit yourself.
No, it does not and it never did. Perhaps by chance.
Can you explain lines around N0017 then?
This gcode is wrong. It does not mesure Z offset correctly.
usb_write functions are implemented in latest beta version.
How did you contact support? I can not find your request.
Please, post your profile file and also the gcode program file that you use "Start From Selected line" with
File/Export Profile
Export profile and send .zip file to our support.
Just for info - driver installed to C:\Program Files\PlanetCNC\Driver\Driver folder is same one.
You need to install driver. Latest driver s available for download here:
https://cnc.zone/tng/tng
FYI just yesterday I installed this driver to latest, full updated windows, without any issues.
Which controller do you have?
But you can use ExtOut for mist, flood and spindle on/off.
Edit M7, M8 and M9 scripts and use M64 g-code in there.
https://cnc.zone/gcode/mcodes/mcode-m64...
Send this DXF to our support email
limit, spindle, mist and flood are fast input/outputs capable of IO operation in single step time. This means they are capable to be perfectly synchronized with machine motion.
ExtOut is external...