508,283 active members
3,330 visitors online
Register for free
Login

Search:

Type: Posts; User: rui.orfao

Search: Search took 0.00 seconds.

  1. Replies
    1
    Views
    89

    Re: Set Up MTConnect with Fagor 8055M

    you are correct, you need to contact FAGOR for the correct solution for your cnc model. it is a payed solution.
    normaly for cnc8055 you will need an external PC to install the agent.
    after the...
  2. Re: G01 no movement during execute the program

    first check machine parameter -> spindle ->p13"npulses".
    if npulses !=0 then your machine have encoder feedback.
    in this case, check spindle ->p29"lospdlim" and p30"upspdlim". measure...
  3. Re: G01 no movement during execute the program

    Hi,
    you must check if the real spindle speed is equal to the programmed speed. if not, the cmc will stop and wait until the programmed seep is reached.
    check the spindle encoder feedback

    kind...
  4. Replies
    2
    Views
    816

    Re: 8055i plc compiling

    can you attach the PLC_PRG.PIM program to check if you have some issue in that file?
    kind regards
  5. Replies
    1
    Views
    2,029

    Re: 8055i TC display screen white out

    blank screen = dead CPU or dead graphic driver
    you must contact Fagor service near you
    kind regards
  6. Replies
    1
    Views
    1,145

    Re: Fagor File Name Help

    erockejm

    the file name is always 6 numbers .pim. there is no work around.
    but, you can add a comment to the program. in that field you can add any character you want.
    this info will be saved...
  7. Re: G01 Feed Move not working: Fagor: 8040-T

    kmarsus

    maybe you have some issue with the spindle reading and the feed is set to G95(mm per revolution).
    try to set the feed in mm/min G94

    another issue can be related with feed hold...
  8. Replies
    4
    Views
    1,013

    Re: Fagor 8040 Error DNC

    hello Dmitrijs
    the program is sent to the cnc while it is beeing executed? or you send the full program to the cnc memory and after execute it? one way or another please use boud rate 115200....
  9. Replies
    23
    Views
    6,919

    Re: Connect PC to Fagor 8055

    hi
    for 8055 eprom series or 8055 and older cnc fagor controls, the cable pinout is 2 to 2; 3 to 3; 5(pc) to 7(cnc); join 4-6-8 at pc side; join 5-6-9 at cnc side;
    try thye comunication at 9600...
  10. Replies
    23
    Views
    6,919

    Re: Connect PC to Fagor 8055

    for 8055 with eprom or 8050 and older cnc fagor controls, the pin out is 2 to 2; 3 to 3; 5(pc)to 7(cnc); at cnc side join 5-6-9; at pc side join 8-6-4.
    set serial comunication parameters to their...
  11. Replies
    4
    Views
    1,013

    Re: Fagor 8040 Error DNC

    hi,

    did you find electrical problems on the communication cable?
    how long is it?
    did you try it with 9600boud rate?
    kind regards
  12. Replies
    1
    Views
    652

    Re: no logical home position

    hi

    as you mentioned, there is no hardware reference trips and you noticed some pointers...

    this is very common in very cheap and low end lathes. this is, indeed, the most simply way to do home...
  13. Re: G01 no movement during execute the program

    hi,

    you must check if spindle rotation is detected correctly. most machines don't move while the spindle is accelerating. you can check if F programed fiel turned yellow... this means feedhold...
  14. Thread: Fagor 8060

    by rui.orfao
    Replies
    1
    Views
    525

    Re: Fagor 8060

    Hello MarcoGAspar

    the instruction #EXEC["MYPRG.NC"] will search for a program named MYPRG.NC inside "c:\fagorcnc\users\prg" folder by default. if your program have another name or is stored in...
Results 1 to 14 of 14