Search:

Great I hope this help a lot of people this are little great machines with lots of useful life and with a converted control you have many good years of use ,the spindle some one else told me is...

Hi,the pro light uses thew same controller ,I already convert one of this machines.

Hi,I would say you have a few options but for me the easy way is just to follow my how to retrofit this original box the controller ,follow the link below ,the other is to change the drivers for...

Hi,go to the listing of the retrofit and seed if is the same controller ,if is not you can try to send me pictures but will be hard to let you know how to retrofit by pictures but may be possible...

I try a few times and always start fine but after some use start with problems sorry, just use any out put from the parallel on passive mode and hook up straight to the small line that goes to the...

Yes but don't cut the line that enable the drivers ,with some modification you don't need the jumper on the ground to enable the spindle and you don't need to cut the line for the drivers to be...

I already found how to enable the spindle and the two extra relays for accesories by parallel port on Mach 3 wit some modifications ,please avoid cutting the small line since will be need it ,I will...

I just post how to retrofit this machines in case that some one is interested is a lot of this machines out there and are build good here is the post....

Hi,I have converted some of this controllers but for some dumb reason I have never share this information and I find out is nothing out there showing how is done and is a lot of this machines from...

Hi,the machine is located in Texas

Hi,I just grab this unit on a auction and I would like to know if any one could tell me what will be a good price to sell it ,I have look on Google for a few but all are around 80,000.00 and up,the...