510,051 active members
2,905 visitors online
Register for free
Login

Search:

Type: Posts; User: Jcowles1986

Search: Search took 0.00 seconds.

  1. Replies
    1
    Views
    28

    Re: Clamping force

    i usually go by what im doing, if im using a drill bore style gun drill i will chuck at 300 psi. if its light drilling and turning then i go lower like in the 200 to 250 range material only matters...
  2. In need of a CNC Hwacheon hi tech 350 ysmc Sample Program

    The company i work for just bought a used Hwacheon cnc lathe.
    Id like to get a jump start with the programming and any other information i can get.
    It has dual spindles and one turret. Fanuc...
  3. Replies
    2
    Views
    646

    Re: Star SB-16 Swiss Screw machine

    when touching off on the star, just go to MDI

    t100-t600
    g0 x.dia of bar

    then after you pop the new tool back in
    and snug of the bolts
    g0 x1.0
    to raise the tool off the bar and tighten the...
  4. Replies
    0
    Views
    35

    SR20R TYPE 2 G784 ALARM

    Hey just wondering if anyone out there can give me a sample program on how to tap from the y axis as im getting an alarm when trying to use the g784 rigid tapping cycle.
    the message reads "78 not...
  5. Replies
    4
    Views
    848

    Re: CNC Lathe Program

    Depending on how old the star is you might have to do a a G1 with tap feerate in and then stop spindle,reverse spindle and G1 feed out with tap feedrate.
    Ive seen it done on Citizens cincom F12.
  6. HWACHEON CNC LATHE SAMPLE PROGRAMS DUAL SPINDLE

    The company i work for just bought a used Hwacheon cnc lathe.
    Id like to get a jump start with the programming and any other information i can get.
    Can anybody help me out?
Results 1 to 6 of 7