Search:

Try replacing your R minus number, with I minus.



Sent from my SM-G900R4 using Tapatalk

Move the g43 h18 to line 14 and try again

Sent from my SM-G900R4 using Tapatalk

I thought the 25 degree only applied to the one side. If both, then is it 25 degrees off the shoulder. I can redo . No problem

Sent from my SM-G900R4 using Tapatalk

Dan,

Not sure that the tool you described will work without overcutting where the radius meets the shoulder. See the red lines in this.


342416


If you are able to use a 45 deg tangent...

If you still need help tomorrow, I can help when I get back to the shop. What version of surfcam are you using?

Sent from my SM-G900R4 using Tapatalk

Contact toyoda. They should be able to provide that item, and tech support.

Sent from my SM-G900R4 using Tapatalk

Try this..

g49 g28 z0
M2

Sent from my SM-G900R4 using Tapatalk

I've got an LNC 8 manual. I could scan that part of it, and email if it would help.

Sent from my SM-G900R4 using Tapatalk

Wade,
We have a '95, with the same thing that you have. I'm not at the shop. I think it might use a pressure switch. Tomorrow, i can ask one of the lathe guys what they do if they get that alarm....

Ok. So had to send the 1030-1c out for repair. 3 components were replaced on the board. When testing the rs232 connections, they also found a bad rs232 selector switch with grounding problem. ...

Had someone out to trouble shoot today. Found that the 1030-1c board was dragging down the 12 volt to -1/2 volt, and +4 volts.

He removed the module responsible for rs232 from the 1030-1c board,...

1995 fadal 4020.
Cnc would not power up. Checked DC power supply. 110v in nothing out.
Swapped relay on power supply. No change.
Ordered ele-1071.
Swapped out old 1220-something with the...

After multiple trips to resolve the issue, Prosound service Rockford Illinois got this lcd retrofit done. Looks great. Highly recommend them if you're in the area..

Sent from my SM-G900R4 using...

Update if anyone is interested. . The 1994 machine has a brake that is external from the motor. Found a coupler had come loose and moved. Repositioned, tightened 2 setscrews. Problem solved.
...

Thanks for the info. I found 2 sources, that will retrofit my monitor chassis with a 12.1" lcd. $1295.00

Sent from my SM-G900R4 using Tapatalk

You could put a -4.000 in your work offset z.

Sent from my SM-G900R4 using Tapatalk

We gave a Gpn5a cnc grinder 1985. The crt will work, then go blank . Cycling power will usually bring it back on, until the next time. new monitor is $4700.

Anyone replaced crt with lcd, or had...

Two of or Our cnc lathes, a 1998 okuma crown/osp700l, and 1994 cadet/osp5020 both have problems with the x axis dropping at power off or estop, drifting down to the hard stop or against a wooden...