Hi there, I have a similar problem, lost the PLC program after the 24v power supply failed. batteries had low voltage and didnt save it. Its a kasuga TC-100 with heidenhain TNC415b controller, has...
Type: Posts; User: khbash
Hi there, I have a similar problem, lost the PLC program after the 24v power supply failed. batteries had low voltage and didnt save it. Its a kasuga TC-100 with heidenhain TNC415b controller, has...
Hi there, I am located in Dandenong, Melbourne, Australia, We have an Enshu EV650 with Yasnac i80 control that we purchased but cant get to work. Help !!. This is a paying job if you think you can...
Hi there, I would try some coolant/cutting fluid on it to stop the chips building on the cutting edge. I found dry milling difficult with chip build up. some coolant spray will most likely help.
Also check if the max tool life has been set. we have the 415 and if tool life reaches a set level (you set it) it will look for an alternative tool. just go to tool table and scroll to right side....
Hi All,
I am interested in this machine, FARLEY PLASMA / PROFILE CUTTING MACHINE, MANUFACTURE DATE 1987, 1500MM X 6000MM CUTTING TABLE, HYPERTHERM MAX 100D, HEIGHT SENSING AND GAS MIXING CONSOLE,...
Howdy to all, Based in mentone, melbourne with a kasuga machining centre, heidenhain control, First time I have used cnc and I love it, more fun than the 50 yr old mill I was on. Big learning curve...
Hello all,
does anyone have the pinouts for a HR-410 handwheel, I have downloaded a techical manual from heidenhain but need a password to access the file,
Any help appreciated,
Kevin
Howdy to all, we have a tnc 415b with the remote handwheel hr330, the display shows the error "handwheel ? " . I have checked all the leads and there is voltage to the unit, then pulled the unit...
yep, have to agree with cutsall, it is frustrating trying to teach people at times. I always try and show our workers how to do jobs, most are just unskilled or casual workers, and it is rewarding...
51 here, and still learning, and enjoying it.
this has been interesting reading for me. As apprentices we all had long hair and generally had it in nets, but not always, one of the guys was oiling a shaft on a bench of winding machines and...
I had a problem on powerup, I had rapid moved the machine to a limit before shutdown and on start up it wanted me to move the axis to initialise but it wouldn't respond, took a lot of head scratching...
punched a 6mm hss drill into an aluminium casting with our machining centre today, still learning to drive it , and I have a couple of 16mm inserted slot drill we use for decorations, another machine...
we had a similar problem with a jammed knee and use lots of heat, oil and a sledge hammer to make it behave again, a bit savage but it was for the scrap bin otherwise