Hey there, a Fagor Innova 40i came with a lathe I brought in recently going thru set up and wondering if it has a zero approach visual and alarm feature that I'm missing somewhere in the setup.
I...
Type: Posts; User: Inuk
Hey there, a Fagor Innova 40i came with a lathe I brought in recently going thru set up and wondering if it has a zero approach visual and alarm feature that I'm missing somewhere in the setup.
I...
Sorry I missed these replies guys. Quite possible I'm loosing my mind ! Ran into the same problem XY speed issue recently and coming back to the Zone to post about it found I'd already posted the...
Anyone using Alphacam/Trocam on a Trotec laser. Need help, alphacam is driving me mental.
Brilliant, you owe me a pizza from that cool oven next time i'm in your neck of the woods. :cheers:
The set up to read Gcode feed rates is done via: Menu - Auto Pro Setup - GCode Read Setup - FRead. Default FRead setting is disable. Button 2 and 6 toggles between disable and enable.
Manual for...
Anyone know about Curve Acceleration ? Trying to cut aluminum and all seems well until the feed changes. See video here. SHG1212 curve acceleration trouble - YouTube
I've played around with the...
Thanks for the reply. I've set the ZdwnRatio to the minimum (0.01) before running the file and changed to a ball cutter which helped. Edge quality is pretty bad but at least it cuts.
I'm using VCarve files on a 1212 and don't seem to be able to adjust the plunge rate, anyone know if there is a minimum rate from VCarve? Adjusting the rate in VC doesn't seem to have an effect on...
The machine is an Excitech with original controller. Problem only seems to occur at very low feed rates.
Hey all, hope someone can help me figure this out. Excitech Router. I ran a timed test over 1000mm and found the X axis travel rate is 50% slower than Y axis travel rate, even though the same feed...
Could it be your cutting file is larger than your table ?
There's some DSP info over in the Excitech Forum
http://www.cnczone.com/forums/excitech_routers/114991-english_dsp_instructions.html
hey all. looking for help figuring out what seems to be unintended feed rate variances. I've posted video of what the machine is doing here: YouTube - Router Aluminum 0021
Speed seems to vary...
hey all. looking for help figuring out what seems to be unintended feed rate variances pocketing a hole. I've posted video of what the machine is doing here: YouTube - Router Aluminum 0021
...
Thanks, I called the folks @ Rhino who walked me through the process. What machine do you have ? if it has a DSP have you been able to run files from a USB ? I finally found a 1G USB that shows the...
Changing the Spindle settings to 7e didn't have any effect other than give me 5 speed choices on screen, non of which altered the spindle speed.
Size matters. Finally found a generic 1G USB stick that works with the pendant, ...sort of. The USB files are listed but they won't run. It'll show the process screen but confirming it returns to the...
Sounds like we're getting somewhere. I'll check this out next time I fire up the machine.
Thanks
Hi Bananafish, found this Manual over in another forum. Might Help.
Found this in a post over in the Controller & Computer Solutions forum. I know a few folks here will be pretty happy to get this. :banana:
Thank you !! I know a lot o people will be pretty happy with the manual !! I've been struggling with the badly translated one I have.
You guys made my day !!
Tried to send this off thread but your mail is full.
Did an inner format work for you ?
I have the same machine though I bought it used. I beleive it's about 6 years old. I'm interested to...
Hi Woodcam, I've never been able to control speed with code and have always had to set it via the VFD. Do these setting enable Speed Control from code ???
Settings for Spindle Set Up on mine are: ...
I'm relatively new to CNC and so I'm not sure if there are different versions of the excitech DSP or whether the functions/terms are the same given the menus are so cryptic. The term 'Inner Format'...
I'm not an expert in this but have you tried Inner Format (Menu>System Setup>Inner Format). I've done it a couple of times to resolve issues and it seems to work. You'll need to reset all setting...
Hey Skip, 31.5" assorted sheets for trial. Ordered tooling also. Thanks for the link and feeds. I'll post photos when cut.
Cheers
Anyone know which Rhinocam post processor works with Excitech ??
Cheers
Hi Skip, got some Dymondwood on the way, what speed/feeds are you using ?
Phil
Never tried them. Don't work with wood much. Today it's aluminum with Onsrud O flute carbides. We do plastics too so its pretty much all Oflutes.
Was curious about the dymondwood you...
ah, that would make sense. Cheers Skip.
Going through the DSP settings I noticed there's a ' Read T ' setting with options Enable/Disable. Anyone have any idea what this is for ?
Note to self: Enable Gcode F after resetting DSP....