Search:

Thought I would provide an update. I am now up an running with the 95 plugin.

Somewhere between the last time I used my router and when I added the UC300ETH-5LPT and UCCNC my RS-485 converter...

Gerry,

When I configured the plugin earlier it did find the port when I clicked available ports. It matches what I expected to see. These were saved and then UCCNC restarted. I had also...

I installed 95 with no change.

Interesting, I wasn't aware of a pop-up. I am not getting any pop-up on startup of UCCNC. I am wondering if I should uninstall and reinstall everything.

I did some checking and did do the PWM check box with apply and save again. Still no motion on the spindle.

I took some screen shots to see if that would help in the troubleshooting.

See...

Gerry,

I thought that I had done that, but will double check.

Thanks for the quick reply

Regards,
Bob

Dan,

First off, thanks for putting all of the effort out to build this connection to the vfds.

I am hoping that I might be able to trouble you or the group here to help me understand what I...

looks like you are at the same point that I am with my bridgeport. were you able to resolve your problem?

Thanks Shefron

Gus, Thanks for the reply. The spanner wrench for it says "erickson no. 30 quick change". Is it true that an NMTB30 will interchange with this or am I limited to using QC30?

I picked up a used Bridgeport Series 1 CNC that I am converting to Mach 3. Anyway, it has the 1/4 turn QC spindle on it and I am having difficulty finding suppliers for the tool holders. So I...

Yes, they are SEM.

just an update. The mentioned the wrong specs for the servos above. They are 140V/ 47A servos and a max RPM of 3700. I am assuming at this point that they have encoders as the boss system was...

I recently acquired a Bridgeport CNC Series 1 Servo machine that at some point had been converted from Boss controls to Fagor (model 800M) back in the day. The spindle had also been converted to run...

I can get the same way or so I have been told by my kids!

Did the club idea go anywhere? I am se Wisconsin and am interested.

I don't have my rotary table setup yet. So I would be doing a face and then turning. What I trying to figure out is in Dolphin how to rotate the model to face each side. I am ok it that means...

Nice work

I have a part that I need to setup cam to machine features on the top and the bottom of the part. The ideal situation would be to rotate the part so that the face needing machined features is the top...

I have a new and unused cncfusion ballscrew conversion kit for sale. I am curious where the group here would recommend I list it for sale to get the best exposure?

regards,
Bob

I have an sx2 that I have converted to cnc. I just completed the enclosure. I built my enclosure right on top of my workbench. Now I can also run coolant as well as keep chips from going everywhere....

SuperPID looks like a great option for my router. As mentioned above there are limitations to using it for my mill. First is that superPId only works with brushed and not the brushless motor that...

Arturo at CNC4PC was able to get me going. He was very helpful and his products worked perfect, just a lot of user error here

the setup in Mach needed to be:

MY SETUP
Kernal Speed 35,000
...

Arturo at CNC4PC was able to get me going. He was very helpful and his products worked perfect, just a lot of user error here :)

the setup in Mach needed to be:

MY SETUP
Kernal Speed ...

I am hoping the group here can help me with a problem that I am having.

I am having issue getting my spindle to run correctly whether I select CW or CCW rotation.
I am just setting up the spindle...

Were you able to get this going? I have been working on the same basic setup but struggling. C11g bob with the ms 4213 on a. Brushless lms sx2. I am using a hobbycnc for the main axis and they work...

Has anybody gotten their spindle setup with this board? I am trying to run mine off of a c11g on a second parallel port and having difficulty getting it going. I am using the wiring diagram provided...

I currently have a micromark 7x14 mini lathe that is manual. I am considering purchasing another lathe in the 9 or 10 swing range. I would like to cnc one of them. Now the question, if you were to...

Thank you for the video. This really cleared it up for me.

The link in this thread is no longer active. Does anyone have this video that the could send to me or point me in the right direction?