Search:

I am seeking a Fadal Repair tech in the greater Houston Area. The company I use now is ran by an elderly man and he is becoming unreliable. I have a 6030 and a 4020 that both need repair. If you...

I am located in Houston Tx and was curious what the going rate is for a "walk in and need it now" job. Had a customer of ours who only sends us screw ups from their regular shop and they usually...

Never got anything out of using them. Boss basically wasted his money. Made many quotes using very very low rates and still nothing. We would have lost money on those jobs in reality if we would...

I agree dunnitagain, I am sure that the Camsoft would be ok if you were using it as a hobby, but for an industrial use, it is not stable enough.

Thanks Greggv, I will let our guy know when he has to resolve this issue again.

Just FYI, We have had 3 machines retrofitted to Camsoft. Two were just Camsoft controls added to existing wiring, servos, ect and one done with a complete Camsoft kit and they have been nothing but...

Has anyone ever flown with a magnetic base indicator? No one at TSA even knows what those are so asking them is a mute point. Same with the airline. I am traveling to check out a machine and my boss...

Barney can you shoot me an email at [email protected]

Thanks Barney, I haven't gotten my hands on the laptop as of yet. The company owner is supplying me with one, once I get it I will respond back to get a copy of it from you.

Sorry if this has been asked before.
We are looking at purchasing a Fadal 6030 mill with the 88 control and I have to fly to Detroit to check it out. Our Fadal we already have uses USB drives to...

Great, this explains a lot of what we were experiencing with our experimenting. We went with the "in Control" and figured out we had to input the tool radius in the "D" input. I appreciate your...

Please forgive my ignorance, but we are still trying to get the most out of our Okuma MC4VAE with the OSP5020. We haven't had to use the cutter comp until now. I understand the Fanuc cutter comp...

Thanks, we've contacted someone local and he is scheduled to come soon.

Got the board back. They replaced the all of the relays and it tested good. Our guy re-installed the board and we turned it on, MDI'ed the spindle speed and it worked correctly, MDI'ed the tool...

Underthetire, you were correct. We pulled the board and noticed that someone before us had tried to repair the board with jumper wires behind the relay because the circuitry was damaged. The zero...

Thanks for the replies. I will give this info to our maintenance guy when he comes into town.

Vac type A

Looking further into it. Each time it gets stuck, no matter what part of the sequence, I get code "3040 spindle has not stopped" on the diagnostics page. Even when the spindle has locked in its...

Hey guys, lately I've been having problems with my Okuma MC-4VAE /OSP5020M. When the control reaches a tool change command, the tool change sequence will stall at different stages of a tool change....

Thanks dcoupar I'll check it out once I get to my office.
Dcogswell I'm located in Houston


Sent from my Sig Sauer IPhone to your eyes.

Is there a way to disable the power saving mode on the OSP5020M controlled MC-4VAE machine. I have changed the parameter from 30 to 60 but it still shuts down after 30 minutes. I come back from lunch...

We recently bought a used Okuma MC-4VAE with the OSP5020m control. I have a 20 pot tool changer but some of the pots are not operable. Under the tool data pages these pots are marked N/A. It has me...