Thanks ASIGuy, I'll look into the parts you mentioned, hopefully that will do it!
Type: Posts; User: AndrewCNCRP
Thanks ASIGuy, I'll look into the parts you mentioned, hopefully that will do it!
My Y axis motor is fluttering badly ie- If I jog with the pulse wheel in thou I get one thou - ok, two thou - ok, three thou massive stuttering, four thou ok, five thou ok, etc.
A friend suggested...
I have a 1997 VMC15XT with a 1400-5 CPU. I also have a 97.3 0159 system board (firmware).
I am trying to use the O(1) = 1 etc type input output macros to control the 1040-2A mill interface board...
Hey everyone,
I have a very basic and embarrassing question to ask:
Having removed the x way covers a while ago, I've forgotten how to install the bolts on the front and back which mate to the...
Hey everyone,
I recently acquired a '97 VMC15XT, it has had a pretty normal working life, but is mechanically sound.
In getting it up and running I noticed the door rollers were ground into...