Search:

Hi, I am finding it difficult to find where i add a new thread, I hope someone can help on this. I purchased my Momus plans about 7 years back and i see since then there is a Version2 revision. I...

Greolt,
In Post #11 you refer to a target symbol to turn the laser on and offthis is what I was asking about in my post in the cnczone site when I was asking for an explanation on the script to do...

Hi
I am looking for a data sheet for the following motor
NameSlo-Syn
type M092-FC-319
2.5 v
4.6amp
spec BM101029
200 steps per rev
wires are
one orange

Greolt,
I know what is happening in the electrics and how to apply it on my system, Its the code that has me beat I have tried so many times to understand it it is just something I hcant get my mind...

I am going to order one of those lasers and as I have one of those laser edge finders on the link I will see if it fits the crosshair laser talked about on here and report what I find.
Jim

On trolling through this site I gather the code gets attached to 2 buttons.

Xmove = GetUserDRO(1152) 'X distance DRO
Ymove = GetUserDRO(1153) 'Y distance DRO

Code "G91 G0 X" &Xmove & "Y"...

Hi
Looking at the posts mentioning the thick lazer lines If it is accuracy you want to make a fine crosshair on the lazer you could buy for just over $19 a Polarizer from this site...

Hi
What screen set are you guys using for cross hair lazers is it available somewhere
Jim

Greg
I set up the probe as in your screen Print and It still triggers an emergency stop.
Jim

Ahhh, Its Probe I had used Input#1
Thanks for that
Jim

Managed to do that at last
Jim

Greg
For Some reason i cannot attach the file here. How can i get it to you
Jim

Greg
OK, I have the light on MACH3 going on no problems there.

It is when i activate the Auto Zero and earth to the Machine Body that it just emergency stops the machine just like I pressing the...

Hi
From the response I gather that the wiring is correct?. If so then i probibly need a 3K resistor and i presume that goes between the 2 linked wires and the copper board?
would anybody have any...

Hi
I am no expert at this Electronics but i need some help on this Tool Zeroing.
I am using a CNC4PC Noard (C11G)I have connected the 2 wires one to pin 12 and the other to the 5V beside it and the...

I have not decided what one to go for I want a fairly big one and i like the buildyourcnc one need to finish the CNC mill first though having problems with the servos turinig the correct way....

As in the readme file from Rockcliff try
http://www.metalsupermarkets.com/MSC-storefinder.aspx?Region=UK&Map=UK
Get a price from them by phone, I have not tried them yet as I have not started the...

Greg,
Checked that out, i dont know why i never looked at it before, i will try it out and get used to it, that sorts the soft limits out for me
Thanks
Jim

Greg,
These Photo Interupter switches where I get confused with them is that there is many types of them and as not being electronically minded I would not know what to order specification wise and...

On converting my Seig X3 Mill the one area that I have halted at is limit switches, it is an area that is not covered in any detail. It would be usefull to see photographs of other peoples setups and...

I see that some have placed postprocessors on the OneCNC site, as OneCNC are now using this for support could the posts not be placed here.
I thied to join the support site in OneCNC and it kept...

Ken,
I have thought about double thrust bearing support on the front and it is a good idea as there is plenty of room at the front do you have a sketch of what you done, as there has to be room also...

Mike,
I bought the X3 from Arceurotrade good people to deal with, The article on the website on the retrofit dosnt give detail on that part although the ballscrew is fitted with a spigot that is...

Hi All
I have set up my control box and wired everything up, All appears to
be working correctly as I have the motor humming away waiting for an
input signal, the error light on the G320 goes out...

So the ammeter is wired in Series, I have seen somewhere that it goes in series and the ammeter is bridged across the shunt.
But i want to be sure before I do it.

The Ammeter was advertised as a 0-30 Amp it is one of the digital oblong panel meters and comes with the shunt, the problem i have is how to wire it up with the shunt and also where to place it in...

Hi,
I have purchased a digital voltmeter and ammeter for to use in my control box for my cnc mill.
First problem is the wiring of the ammeter to show the full load of all the motors on the X,Y,Z...