Search:

The relay itself is soldered on the board and I dont see anything that looks like a jumper to switch it to N/C. There has to be a way to do this but without a manual Im kind of lost.

I have a troyke rotary table that came with a standalone servo controller. I am trying to interface it with a Hurco VMC. My problem is that the finish signal from the control box is a pulse and my...

I was reading some old threads that were discussing home made chip compactors. Just wondering if anyone actually followed through.

I am in the market for an 8-10 inch chuck lathe. One of my options at the moment is a QT-20 with a 10 inch Howa air chuck. I like the added thru-hole capacity afforded by the air chuck, but Im...

Thanks, that should help me quite a bit.

Just picked up a Puma 4 lathe. I think it was build in 1991. Unfortunately it came out of a storage facility and didnt have any of the manuals with it. I powered it up and everything seems to work...

They bumped up the Y travel from 14" to 16" on the VM10 and from 18" to 20" on the VM20 & VM30.

Options that I got as standard included the flood coolant, the worklight, the clear dome cover, and...

Ive had my VM10 for about 6 months now and I have to admit I have no regrets. I am really happy I waited for the VM10 over buying a VM1. You get alot of things standard that used to be options, plus...

I think NIMS (www.nims-skills.org) is a step in the right direction. I was involved with some of the initial online testing a few years back. Each test involves a written test and a part that must be...

Instead of trying to reinvent the wheel you may want to look into a ready made solution. I know Bluco has a large modular plate system with accurately spaced holes and scribed lines. You may find it...

I run 2 lynx 200 lathes with presetters. Both machines were made in the same year, only a couple months different actually. One machine will automatically align the cursor to the offset of the like...

The title is pretty self explanatory.

I am looking into buying the first machine for my shop. I have been running milltronics machines for the last 2 years. While I like the controls I am not...

I have been working in the tool and die trade for about 7 years and have been programming and setting up cnc equipment for about 6 years. I started out hand writing everything and I saw the...