Search:

Some mice had a field day and chewed up some of my wiring while my machine was in storage and I believe they were living in the computer. I got all that fixed now and did a quick test cut tonight to...

Finally! Tonight I was able to set my machine back up.

https://www.cnczone.com/forums/attachment.php?attachmentid=423710&stc=1

After being stuck in ****ty living conditions for almost 4 years and getting my hopes up a few times thinking I would have a place to set up shop I finally have a spot to cut without worry.

After almost 2 years in storage, I finally got a place with a spot for me to CNC again!

I got everything from ebay basically.

Also to anyone who might follow this thread, I had to move to an apartment with no garage or setup place. Hopefully that changes in the near future and I am...

I tried painters tape also, doesnt work good at all.

For all the crap the TB6560 gets, Ive had mine since day one. Its paid for itself, my machine, has never had one issue and has made me a small pile of cash. I was running it the other day and it was...

Can you post the 8" clothes pin file?

I tried contact paper on this one to see how it worked, cut my sanding down a ton. I painted the cuts with black spray paint, danish oil finish.

Still wet in the picture, flash made it shiny.
...

What type of shelf paper do you use? Seems like all I can find is non-adhesive.

I found some: ebay

Not perfect but not horrible either, a start into the world of tedious painting.

211594

A number plate for a house we just built. I might try and paint the cuts white.

I cut the pocket in the base with a .125" endmill and went a .25" deep for you guys who are going to cut one.

Headphone stand.

206814

206816

I spend more time thinking of what to do with my scrap wood then anything.

Cell Phone Recliner

201572

I seen this thing on Reddit, a CNC Machine that rests on top of a stack of plywood.

Impulsive Furnishing Unit ? Frame Moooi Award winner « Christian Fiebig

Breaking Bad!

198566

Thankfully Dewalt came through and got me the motor brushes today.

My old brushes:
197910

What new brushes look like:
197912

And finally got started on a sign I promised to have done by...

Caution: Rant Ahead

So I turned on my Dewalt DWP611 the other day to a shower of sparks, the motor brushes are done and its barely a year old. They are simple to replace but getting a set of...

Very nice.

I seen this table on reddit: New Table - Imgur

I got the legs designed. They are 23" tall and the middle shelf is made for 3/4" thick wood.

194642

Something like these: Supported Rail Kit - ebay.

For that last sign I used a 90 vbit and .125 endmill.

I realized I haven't posted any updates on my new machine build lately either, its about 95% done. I just got my Z Axis done the other day.

193034

Antenna how deep a pass are you trying to do and how fast? I normally only take out .125 per pass when I v-groove stuff but with softer wood like cedar I will go .1875. My machine only goes 18IPM and...

Wow that thing is going to be a beast.

Yeah those are good bits. I want their In-Groove bit set badly.

Another sign for a friend in cedar:
192834

Anything you can afford from Vectric. I cant imagine doing CNC work without Aspire.

What are you powering the motors with and list what you have the dip switches set to on the TB6560.

If you are using LinuxCNC double check your settings in StepConf with this guys. If using Mach...

Are you using LinuxCNC or Mach 3? What CAM program are you using? You need to save your dxf design as gcode in your CAM program then load that file in your control software, linuxcnc/mach3.

All...

Here is it.