Finally it's fixed! Turned out to be a solder connection on the board for the power supply. Thanks again for your help everybody.
Type: Posts; User: GetMfg
Finally it's fixed! Turned out to be a solder connection on the board for the power supply. Thanks again for your help everybody.
Forget to mention in my earlier post. Thank you to everybody for your help this far!
Well, good news and bad news. I replaced the whole motor. No luck. This morning i decided to replace the whole z axis servo pack. Got the resistor to stop overheating and no overload alarms. Great...
Ok I've replaced the tach, both servo boards, the resistor, and the Transformers, and the relays. Still doing the same thing, except now when I am in full rapid X moves fine. Moving Z shuts the...
Well I pulled off the tach. There was a fair ammount of dust in the housing so I blew it all out. The brushes and wires looked to be in good shape. Unfortunately I broke one of the brushes when...
Ok, So I bought another SL-2. I've started swapping parts back in forth in hope of finding the problem. So far I've swapped all of the Ice cube relays. And for the heck of it I swapped out the X and...
I replaced the relay that clicks when the power button is pushed. Still powering down. When the machine shuts down it doesn't seem to matter where it is. I have noticed however when the shut down...
I'll check this out in the next day or two and let you know. I think you are probably on the right track. Back when i first started having this trouble, I noticed one of the relays was making some...
I have a parameter list for 2000g Control. Not sure if this is compatable with 2000b or not. If you want it let me know and I'll get it for you.
I have a Mori SL-2b with a Yasnac2000GII control. It keeps powering down for no apparent reason. It seems to run better when it is in an automatic cycle, however sometimes it does it even then. I'll...