Hello
I am a newbie to this sight and would like some info and help please, I have just bought a Prvomasjka ALG/100B mill which is very much like the Deckel Fp1 it runs very well and appears at...
Type: Posts; User: colin1544
Hello
I am a newbie to this sight and would like some info and help please, I have just bought a Prvomasjka ALG/100B mill which is very much like the Deckel Fp1 it runs very well and appears at...
Hello there alot depends on your budget, if it is allowable consider an AJAX CNC conversion, as all the set up tuning is done for you it is conversational programming easy for training, and lastly...
Hello Nick do you take Model engineering workshop, as there was a complete article on converting a ML7 by Tony Jeffree it was in issues 138,139& 141, and I think there was an article later about...
Hello Hans did you get any further with any offline software, if not let me have a PM of your home address and I will send you a copy of this early software, it will need a computer with DOS loaded...
Hello again Charles yes that seems ok for the control board but the transitors I was refering to are the bank of four on the heat sinks mounted on the rear cabinet door, these are the four step drive...
Hello Charles Although I am not familiar with Mach3 setup I am curious if you are still using the origonal stepper drives, as it seems as if you are getting the single stepping pulses and not the...
Hello
again Mactec the simple one sounds OK does the 4 parts to machine include the brake system, as I like the looks of that, as I finnished up on my machine at the moment just putting a fixed...
Hello Mactec I would be most interested to here of your rebuild and any drawings you may have that you would like to share even at a resonable cost to do a 1-1 conversion as My machine sits very...
Hello yes there is a version of software that can be run on a PC at home the version I have seen is a earlier one with just 2 axis but has the ability to input a Z move. I am also waiting for a copy...
Hello Again I have just been looking at the setup files for the Ez-trak and noticed that in the parameter settings there appears to be a setting for a fourth axis and wonder if anyone has ever added...
Hello Keith if you email me your email address I will forward on a download from hardinge bridgeport of a manual for the EZ_PLUS which is the later machine but covers the later software. my email is...
Hello Yes it would be interesting to get more info from other users, I have a later version of the Ez-trak which is a Ez-plus 3 axis with the later upgrade of controls and the colour LCD screen but...
Hello there if you have the offer of a series1 interact with a 145 control that has an good iron work and very little wear on the ballscrews then have a look on the Ajax cnc website, They do a...
Hello there you have the same problem as me and one or two others with these machines they are very high. The only way out is to lift the head off, you have done half of the work, and if you have the...
Hello This is a similar answers to the previous question,
1, The variable speed indicator is just a later version the workings of it and the parts are exactly the same.
2, selection of belt change...
Hello check the existing motor plate you may find it is dual voltage already and just needs the wires changing in the terminal box to set it for 240 volt three phase and just connect up a VFD it will...
Hello I am looking for some help and guidance I have a DOS version Ajax mill setup and would like to put a M P G hand control on my machine, and I am wondering if anyone has used a different M P G...
Hello Nick if you can afford it go straight in with a servo control and look at buying an Ajax retrofit kit, they are fairly easy to fit and work straight out of the box. They are also easy to...
Hello James may be worth your while to give this chap a call as he is not far from you at Bedford area he is a freelance service engineer and would probably be able to sort your board out his name is...
Hello the best and safest way to transport a series 1 is move the turret slightly forward drop the knee low down and rotate the head 180 degrees put a block of wood in between the top of the motor...
Hello Erich the main parts of the machine such as the slideways, ballscrews, that is the X, Y, and the Z axis is fed by the pump. The Bijur pump needs to run when the spindle is running and cut the...
Hello there yes it is a series 1 with a modification to the origonal control the specification sheet does state overall height 89" but I have physiclly measured mine and it is 86 1/2" to the top of...
Hello Nippy I can probably help you out with a copy of software but it is from a DX machine which is probably later than yours. Have you tried Bridgeport Hardinge at Leicester they are most helpful...
Hello If you have enough head clearance inside your workshop to use an engine crane to lift the head back on then make a lifting plate as shown in the series 1 cnc maintenance manual the bolts onto...
Hello have you got the memofix switch on as it will do that till it reaches one of the marker pulsers, if not on then there could be another problem Cheers Colin.
Hello George thanks for your reply the information regarding time date hard drive and basic details is what I needed and like you say our versions on this side could be quite different, but if I try...
Hello George just looking at your replies as a friend of mine has just bought a 2 axis Eztrak with a Pentium 75 motherboard, it has been standing a few weeks since it was last powered up and has come...
Hello Stefan have a look round to see if you can pick up a Brigdeport EZ-Trak preferably 3 Axis as this will cover your movement requirements. A 48 inch bed will give you 30" x12" travel they are not...
Hello Mark the machine you are refering to was a Series 1 interact MK2, it is the same base as the origonal interact and the old series 1 boss machines, but the head was totally different it had the...
Hello George is it possible you can send me a copy of EZELINK and if possi acopy of EZ-PLUS if available as I can't get it in the UK. My email is [email protected]
Cheers George