Search:

I would try compression bit around 18K RPM and just over 100 IPM at 1/2 pass. Faster for less depth.

Equipment:
Gerber Sabre 4x8
Industrialcnc.com 5X10
Software:
Mach
Gerber
Vectric cut 2d,...

Great, My father just ordered a small shoreline bill. Seems to be a decent set up.

Equipment:
Gerber Sabre 4x8
Industrialcnc.com 5X10
Software:
Mach
Gerber
Vectric cut 2d, 3d and V Carve Pro

I didn't read every post so I am not sure it was suggested to check the driver. maybe swap it with with another on the machine to test.

I could not find much info on a "pacer" router. It looks like its made by axyz. Have you asked them? it sounds like the setting for your Hertz is off.. is there a knob or up arrow that will change...

Yes they do! Try choosing mach2/3 archs inches. One of my routers runs on mach and that is teh post I use. Works great.


Equipment:
Gerber Sabre 4x8
Industrialcnc.com 5X10
Software:
Mach...

Are you running direct from the inverter or is the spindle controlled by your controller? It could be you need to check that the relays are in tight or they may need to be replaced.
Equipment:...

cnc 4 pc has them. CNC4PC

I would think you would want at least a 2.2 KW Spindle for cutting Acrylic.

Easy peasy as they say.... click on Config and choose Ports & Pins then under the Spindle Set Up tab you will see General Parameters. You can enter how many seconds you want the delay. I have mine...

Is sheet cam only for Flat Cut outs? I think I saw them at a trade show, and they were really pushing its use for plasma.

I have a gerber machine I use for my flat cuts out and it runs on Gerbers...

Hey Guy,
I have a 5x10 made by Industrial CNC. When I visited them, they did some stuff with a knife from Donek. I think you can get it from industrialcnc or buy it right on the donek website Drag...

Its seems pretty powerful. They seem to have pretty decent tutorials on their website. I learned corel 20 years ago before everything was so easy with websites and videos etc.. I'm not sure if I'll...

Awesome! Thanks. I will post a picture after I get it done.

Equipment:
Gerber Sabre 4x8
Industrialcnc.com 5X10
Software:
Mach
Gerber
Vectric cut 2d, 3d and V Carve Pro

Hey All,
I use the usual CAD programs, corel, Ai etc but just picked up a copy of Serif Drawplus.. Is anybody else using? I post process in Vectric (Vectric Ltd - Passionate About CNC) for for my...

Thanks! I already learned something new!


Mike
My equipment
Gerber Sabre 4X8
Industrialcnc.com 5X10
Software
Gerber
Serif

Fagar can you share the dxk for the waste rail? I'd love to make one for my camp.

Equipment:
Gerber Sabre 4x8
Industrialcnc.com 5X10
Software:
Mach
Gerber
Vectric cut 2d, 3d and V Carve Pro

Thats def a cool chair.

Hello!
I have been checking the zone off and on for years.. joined a few years ago but was not very active and lost/forgot my log in info. I am currently running a Gerber Sabre 4x8 and a 5x10 made...