Search:

It seems you are all discussing either digital and dial calipers. Technically Vernier calipers have neither a dial nor a digital readout. They simply rely on a Vernier scale that requires only a...

Great! Thanks again for your help.

Thanks for uploading the parameters. Looks like it's exactly what we need. Will update you on the machine resurrection when it occurs.

Just one more question: This file contained 38 pages. ...

Forgot to mention, our machine has a Mitsubishi Meldas 500L controller.

Need help restoring parameters on a 1998 Daewoo Puma 250B. Our lathe is pretty much stock configuration. It has the tool setter arm and a tail stock and that's it.

Our machine's 3V battery died...

Just looking at your program, I'm thinking you need to first move to a definite X,Y position before turning on cutter comp. Once you turn on cutter comp your initial X,Y move in the part is where...

Boby,

Look at your I and J values on your radius interpolations. If they do not jibe exactly with the wanted path the machine will wander in search of. Something as simple as rounding up the...

I spoke too soon. Seco Carboloy make one

http://www.secotools.com/upload/north_america/usa/pdf/K2%20218.20.pdf

Although I'm not sure that they don't make one that big, the biggest one I,ve seen and used was 3/4. Do you have the option to achieve your contour by kellering, i.e., in steps?

Have you looked into Graflex twin cutter boring heads. Seco Carbaloy bought them out. We have excellent results with these on ASTM 536 Grade 50 which is much harder than A36. With the right grade...

Que menso soy. Se me olvido darte el sitio.

http://www.torrentz.com/efa01ae3bb02ca77812551f6b26406161bf695e1

L3NO,

Encontre un sitio que promete tener tutoriales de MasterCam X. Puede ser que tengas suerte. Quidado con viruses.

I'm curious, is this machine a mill or a lathe?

Just an update:

The monitor took a dump and now we're buying a replacement. $800+

Al, the burn in isn't that noticeable.

Thanks Geof and Al the man. I try to take a close look for a little hole inside and out but couldn't find any kind of adjustment knob on the outside of the controller, or inside for that matter.
...

My company bought a used Daewoo Puma ### with a Mitsubishi Meldas Controller with an amber monochrome display. Not sure the vintage, but maybe early 90's.

The monitor is getting really hard to...

shadowdog,

Boring our jaws is a tricky undertaking. Good luck with that. It should be done only if you can have the jaws under pressure at the end to ensure that they will hold the workpiece...

nice you tube video but i would have hit the chuck on top with a light weight plastic face hammer when the indicator showed the high spot.