Search:

Hi,
I am currently developing a post for the above machine,but I have hit a problem, the machine is twin spindle , twin turret configuration.when I select a tool , say on the upper turret i...

Hi,
we have a mazak nexus 350 MY lathe that we program in iso format using edgecam 2014 r1.I did a program and wanted to deburr some pcd holes using a 16mm 90 deg spot drill that i had also used...

Hi,
could anybody tell me what field i would need to alter in the code wizard to post the following output format please?

G00 X Z T0100
X Z T0101
G01 X Z
G00 X Z T0100

Thanks.

o.k I'll give that a try
Thanks

Hi,
can anybody tell me what the following error means when I try to post g-code in solidcam

Line14:system variable'zlpos_f cannot be declared

Thanks.

Hi,
just interested to know if anybody has experience of VOLUMILL and how its toolpaths compare to solidcam;s IMACHINING ?
Thanks in advance for any replies.

the feedrates are ok. its the spindle speeds that are sometimes posted incorrectly.The problem I have is that the last thing support seem to want to do is actually come in for an hour to resolve...

we are using decent tools , micrograin solid carbide variable helix. but I think there may be some post issues involved as well

Hi,
Thanks for your input.yes I tried adjusting the aggresiveness slider but it did'nt make much difference.I don't know much about editing the post files,but I had a look at the prp file and...

we've only used it for 2d. I was'nt aware it could be used on 3d work

ok on softer materials aluminium , 316 stainless, not so good on d2 tool steel I've found the finish paths to be less than satisfactory chatter etc. also some of the time estimates are way out

Hi,
Anybody using imachining ? we have got it on a trial basis (been about 6 weeks now) we have had mixed results,mostly disappointing compared to the hype I have to say.How has anybody else...

Thanks for you reply,
do the text letters have to be debossed on the part or can the text be put on a custom plane and wrapped onto the part in solidcam?
if I put the...

Hi,
Anybody know how to use the c-axis to engrave on a diameter in solidcam 2011 ?
Thanks.

Thanks for all the replies, got something to work with now
Thanks.

Thanks for the reply , do you think 1/2 cutter dia d.o.c will be ok with the long series cutter ?

Hi,
I have a 5.5mm closed slot x 32mm deep to machine in mild steel using a long series 3-flute carbide cutter. Does anybody have any reccomendations for feeds & speeds d.o.c etc. I would be...