Thank you DeadlyKitten
You have raised many good points, i appreciate the effort you have put into your response.
I will let you know what we decide
Kind regards
JBO
Type: Posts; User: jbo
Thank you DeadlyKitten
You have raised many good points, i appreciate the effort you have put into your response.
I will let you know what we decide
Kind regards
JBO
Hi All
We are looking to purchase a new machining center.
At present we are looking at the Okuma Genos M560v and the Makino PS105
Both would be fitted with a 4th axis.
Initially for an...
Thanks FEAWaterjet
Looks like a great product
Kind Regards
JBO
Hello Everyone
We are looking at implementing the ERP software E2 shop.
Im looking for some reviews from people who use it.
Thanks in advance
JBO
Hi All
Im looking into a new lathe for our shop.
I am impressed by the the Mazak QT Compact 200msy.
We currently have a Hardinge T42 that is bar feed and we are looking for another machine to...
Thank you for your reply
JBO
Hi all
Looking for some information regarding the control on a NH4000 DCG 2005 model.
We are looking at one second hand and im trying to get some information regarding the control.
I have been...
Hi everyone.
Does anyone know how I can run/single block a program with the tailstock in manual mode?
Am about to run a program using a mandrel to hold in place a bit of stainless pipe,...
Hi Brudy
I has a GS250 if you still need help with the turret alignment please post and I will answer
JBO
Thanks for all the input
We were very keen on the Makino but the deal on the Okuma is a lot better, the machine has slightly better travels in both X and Y, my big concern with the Okuma is the...
Hi All
We are looking at a Okuma M560-V, do any of you have one and if so what are your thoughts.
We are comparing it with a Makino PS95
Both machines have 12000rpm and similar travels, we are...
Hi all
We are looking at a super minimill2 for a project in alum
The parts are a small alum case that will require a lot of ball nose finishing on the outside
Due to the qtys and the price...
Hi Guys
we are looking for an m code to operate the chip flush on our mill (hardinge vmc 1000 P3 with siemans control 810D)
The chip flush is generaly switched on and off manually but when we run...
Hi Chris
you can get 6061 plate from Action Alum, they can cut the plate to the size you require.
Action have branches in Bayswater Dandenong and Thomastown
I hope this helps
Hi Mr Bean
is the ob still open for quotation
JBO
Hi Smau
I have two of these machines and undestand what you are going through.
We replaced the belts with one belt but had it split therfore ensuring it was the same length.
This helped a...
Hi Colin
A late reply i know but, Sandvick have a recycling program were you get credit for future cutter purchases, i can not rember the $ per kilo rate but give them a call and see what you can...
Hi all
I have been asked a question regarding Onecnc and vista.
Will Onecnc 2003 ver 4.52 run on vista.
I said no but thought i would ask the question in the forum to be sure
Thanks in advance...
Thanks LeftcoastCNC
One of my customers converted it for me using corel draw, it came up ok but did require a bit of cleaning.
Thanks for the reply
JBO
Hi Guys
Could anyone recommend a program to convert a bmp to dxf.
We want to scan a logo then convert to dxf so that we can machine the detail.
Any help wpold be greatly appreciated.
JBO
Thanks Guys
I am visiting the Mazak dealer this morning.
The service is a concern from both companys, that said they both tell me my concerns are not valid.I have ask around and been given bad...
Thanks Mate
Will take that on board, spares and back are one of my big concerns with the Daewoo.
JBO
Hi All
I am repeating this post under this sub forum.
We are looking to purchase a new CNC Lathe.
We ahve looked at many brands and due to needing a machine quickly we are forced to consider on...
Hi I am looking for some comments
We are looking to purchase a new CNC Lathe, we have narrowed the list of machines down to a Mazak quick turn nexus 200 and a Daewoo Puma 240LC.
I am aware that...
I can only comment on the siemens control from expierance, but our machines require regular tunning ( every 4-6 months ) or they lose there repetability. Our VMC600 gets the gitters when machining a...
Hi Leupp1
do your machines have siemans controls
Thanks again for the information,
We have just taken delivery of our new spindle, three and a half weeks after it blew.
Not happy to say the least, we have work piled up all over the place!
I...
Thanks for the information
Our problems here are getting bigger by the day.
I will look into the haas machines that are here talk with the agent.
Thganks again for your help
JBO
Thanks WMS
The agent here seems to be a nice fellow,I have yet to find out about there support, but have have spoken to two owners here 1 very happy the other no complaints but not overly...
Hi all
We are looking into upgrading or machinery ( 2 mills and a lathe ).
I am looking for personnel expeirance from Haas owners on thier machines.
IE would you recomend them, have you found...