thank you, for your reply. I found the parameter to be 4077. The machine is a Graphite Center snc 64 the tool changer is working now, I was cutting some electrodes when while running the alarm (414...
Type: Posts; User: samtc
thank you, for your reply. I found the parameter to be 4077. The machine is a Graphite Center snc 64 the tool changer is working now, I was cutting some electrodes when while running the alarm (414...
Does any body knows the parameter to offset the spindle?
This is a makino le blode NC64. When I do a tool change the spindle does not get lock in the proper location, I also have the problem that...
Hi,
I'm having the same problem on a DMC 63v, did you fix it? and if you did can you tell me how you got it fix.
thank you.
sam
Hi,
Can you guys send me a copy of the manual too,
thank you.
[email protected]
The maxnc 15 is a closed loop, and it is an older ver. about 5 years old
I'm getting motor error, I'm not sure if the control is broken or the step motors
the controler has a switch with a red...
The mill is about 5 years old and they had made changes to the step motors and the electronics for the last five years, but if you have the setup disks for this mill (maxnc 15 CL) I'm interested in...
Hi,
I have a maxnc 15 CL mill, that I'm trying to get to work on kcam4 (Demo ver. ) because I don't have the disks that came we the maxnc. I can not get the mill to work at all, the only thing that...
Hi, my name is Sam and I'm newbie to the forum.
I'm try to setup a maxnc 15 (used) that was given to me, but I can not get it to work. I'm using KCAM4 (demo ver.) because I got the machine bare...