Does anyone know if the 6040 controller board has a charge pump.
If I'm going to be comfortable in walking away while jobs run, I would like to have estop if there is a comms problem between CNC...
Type: Posts; User: direwolf
Does anyone know if the 6040 controller board has a charge pump.
If I'm going to be comfortable in walking away while jobs run, I would like to have estop if there is a comms problem between CNC...
I would run a ground wire from the control box to the spindle mount + another from the control box to the vfd earth. Its an easy thing to do and it will eliminate any interference from grounding...
Have you re-done the grounding in control box?
Have a read of this thread
http://www.cnczone.com/forums/phase_converters_vfd/126504-huanyang_hy01d523b_help_please.html
Failing that, it...
Solved the problem. I had the spindle mounted too high in the bracket and it was bottoming out and loosing steps.
Sent from my A500 using Tapatalk
Try step pulse 10 as that's what I have on mine.
Sent from my A500 using Tapatalk
I've noticed that even when powered up, I am able to turn the stepper by hand using the knobs fitted on the back of the stepper. I would have thought that they would have more holding power than...
I am testing out my 6040 CNC and I'm having a problem where he Z zero raises itself by 2 mm part way through doing a 3D finishing pass.
Its almost like the bit is loose in the collet but I have...
You may be on to something there
I've been trying to make contact with a number of Chinese sellers of small desktop CNC's since last week and I'm not having much luck.
Is there some sort of holiday on in China at the moment?
Anymore comments on these machines? Price looks ok.
I only found this video, so I don't know what the spindle speed is. I do know that the material is a Polyurathane block.
They guys that made it are from Norway and they have there own website...
This is just sweet to watch. It should make a great model boat too
http://www.yellowwhiteheads.no/assets/multimedia/NODD_mark_V-130.wmv