Search:

PM sent

I never got to test this out on the HS1 I used before it went away, but I found this page awhile back.
CNC tip: A pallet testing custom macro

Problem solved.

I'm somewhat of a lurker on here, although I chime in from time to time when I feel I have something to contribute and it hasn't already been said. I've reached a point where my normal means of...

Hey guys,
Sorry I couldn't get it posted today. Shortly after I replied I got swept away into the shop, never to return to my computer to do what I actually needed to do. I'll send it out...

I have it in front of me now. I can either paste it on here or email it to you.

As far as I remember it's always been, "right-click" on Machine Group 1 (or whatever yours is); move to groups, then choose new tool-group. Is that option not available?

I did this with our VF0 and it works great. I used the smallest USB drive I could get my hands on, a 4GB, as you're basically using their software to reformat and partition it into many virtual...

Try adding a G91 on the same line as the G28. Just be sure to add a G90 before your next move after your tool change.

I've tried using a USB to 9pin before when trying to run a small techno router. The problem I had, even though i had all the current drivers for everything, the problem came down to how the adapter...

Some folks I know lost a couple spindles on their new VM's due to the oiling system not functioning properly. A one-way valve would leak, not allowing the oil to reach the spindle. And since it...

In X5, and I believe X6, on the arc filter/tolerance page the choices are in the "Filter Ratio" drop down. Off is default

In Mastercam have you tried editing the control definition for your machine?
If you go to : settings / control definition manager / linear ; you should see some options.

Chuck T