Search:

I don"t have an answer to your problem, but do you have the parameters and data parameters that you would be willing to share?

You need to set the !st G4(may be G53) by Indicating the bore of the tool holder you will use to drill a hole on X-Axis center line. After Zero Return, the X should read zero. The distance from Zero...

Do you have any manuals? Where are you located? There is a relatively simple procedure for setting up the tool pressetter..

I can't seem to attach a picture to this thread. If you have an email, I can send that way. Any help you can give me would be appreciated.

Does anyone have a schematic of a Takasawa Engine Lathe. There does not appear to be a Model number on it, but it is about 10"-13" X 24". Any help would be appreciated.

'

I have an Ikegai FX25 with 6T control and I need the diagnostics. Fanuc says 12-16 weeks for all the 6T manuals. I have a machine alarm and have no way of knowing why.
Thank you

Does anyone have the wiring schematic for the Chevalier FM-33H with Anilam Control. I have a problem with "Ded Stop Switched Reached" message.
Any help would be appreciated as Chevalier has not...

Is this what you are looking for?

http://content.heidenhain.de/doku/oma_controls/CD1/tnc/151_155a/gb/sa155.pdf

Measurement and Control Technology for Demanding Positioning Tasks | HEIDENHAIN

See if your dealer can get a copy of the parameters, including timers, keep relays, and also see if you can get a maintenance procedure to reset tool numbers. Someone should have sold another machine...

You need to go to "SET" Page, type in#6219 and then cursor down.
Change parameters through MDI and parameter page. If you set the #6219 to"4" you can run machine machine for testing, etc. Change...

If I understand correctly, you need an endmill with the stated radii on them. Are the end mills the diameter of 2Xradius? If so, why not have a cutter sharpener company make you the endmills from...

I hope you will reconsider and continue to post on here as it looks like an excellent engineered ATC, so far. It can be adapted to almost any machine. Or post it somewhere else and let us know...

I don't know if you got the parts list yet, but I have an image file, but I don't seem able to attach it here. If you send a PM, I will forward it to you.

Excellent video, Thanks for sharing.

This place seems to have a lot of timing pulleys.
Timing Belt Pulleys Taper Bushings Timing Belts Belt & Chain Tensioners Tension Testers Diametral Pitch Gears Gearheads

Do you have a parts list? This should show you how it is assembled and what bearings you will need. I know some of the bearings are relatively expensive.
Where are you located?

I am a one man shop(garage) but I use Alro because they have nearly always the best price, especially with shipping included, and MSC, while you can sometimes find a better price, I will have my...

Does anyone know if it is possible to utilize a VFD with the 1100 control?
Thank you

email me the files at [email protected] and I will give you a quote.

Try the following. Shut off machine, hold "P" and "Can" together and restart machine.Hold untill startup is complete. Then try to re-home.
-

Turn knob to MDI position, then push CMD button and page down to next page. You should be able to enter almost all commands. Press start button to enact.

What will you be using this on and what for? Production or one or two?

Note that "D" is 4 places. ie. D0100 is .0100

What lathe, what control?

Nothing in my manual addressing this.

I have an Ikegai with 6T control and I program this way:
G28W0
G28U0
G00W-1.0
G50X00
Moo
with the machine zero returned, GO TO INCREMENTAL PAGE AND "ORIGIN" X & Z
TOUCH OFF THE FACE AND OD AND...

I also have a problem with the backlash going in. When the reverse move is called for, the amount of backlash (.002) moves 1st at rapid, then the programmed move completes at feed rate. This actually...

You should be able to take as much of the material as you want. The carbide bar can bore up to 10X the diameter(.25). The main thing is to bore consistently, ie: rough cut, (2) finish cuts. It is...

You do not say what machine is but this sounds like machine alarms, not Fanuc.

I have a KIA KIT30A Operation manual in paper form. It is about 180 pages large PM me.