Hi, Can I please get a copy of CDSlite for my mill plus? Thx
Type: Posts; User: markp
Hi, Can I please get a copy of CDSlite for my mill plus? Thx
I recently picked up an 1100 series 3 machine from a lab that I occasionally purchase tech assets from. Ive never had a hobby grade machine since I started using CNC in 1999. We have 2 DMG Mori VMCs...
For some reason, the control defaulted to having the LIMIT SWITCH setting not checked in settings. Now works normally.
I just picked up an 1100 series 3 mill. I power up path pilot, undo estop then power on machine, then hit reset. When I press the ref buttons nothing happens. I can power off the machine, etc reset...
I use a 4 bay star tech hardware based bit for bit duplicator. These are more reliable than any of the software based solutions for basic cloning. Dont ask me how I know!
No, the easiest thing is to pop a drive into a duplicator and press "clone". I have the install CDs but any install is a pain compared to a hardware based drive duplicator. Also, if the drive dies,...
I have always made clones of my CNC machine hard drives as soon as I get them in house. I recently acquired an 1100 series 3 and searched around regarding cloning the hard drive. I see no indication...
Started losing the offsets on power down. This is a late model 2001. Machine still works fine/boots otherwise. Anyone know where the battery is that stores this info? Searched online and theres no...
So flex OS is the app that switches between the Hyundai OS overlay and the standard Siemens overlay correct? I know you can switch between them in the control. I don’t know if the machine runs under...
Update. In ubuntu, I used DD rescue to make a bit for bit copy of the original 170m hard drive to a 250mb hard drive. When I try to boot from the new drive, I get a "missing operating system" error....
Yes hd is fine. Ive used the startech dock to dupe lots of old ide dos drives never had a problem before. Just seems odd that it wont work for this one
Trying to make a duplicate hard drive for my new to me Hyundai HIT 8s 840C hard drive. Im using a StarTech Drive duplicator that Ive used to make duplicates of drives for my 840D control and my...
Yeah, I have an 840D on my DMC103V mill, this is ancient history compared to that one. I did try switching out of auto to jog but that only works if you're in a program, if you leave the program the...
Well, I sent an inquiry to Hyundai support and here's the response:
"Hello Mark
I got your information from the team at Hyundai Wia.
I have attached the response I received from the Service team...
I mean really, my 1983 Mori SL1 had changeable screens for MCS and WCS. You have to be pretty cheap to not include that feature. Anyone on this forum actually own/run these HIT lathes? After this I...
Seems incredibly dangerous to have a machine that can't display the WCS info. Both for using in manual mode and for setup. I guess it would be usable as it is in auto mode but seems like a really...
After further head banging I see that if you program a move in MDI, say: T01D01 GO X.850 and make a cut the cut is spot on .850. Same with Z. This is after setting the tool using the tool eye using...
Setting up a new to me Hit 8s. Machine wasnt used for a while but everything seems to be in good working order. I did reload the parameters from the drive before using. Trying to set one turning tool...
I picked up my 2000 vintage DMU 50 V in 2015 for $8000. Very reliable so far I’ve probably had to spend about $1000 for stuff like the upper spindle bearing and a couple of the Siemens 611 servo amps...
Ive got a 2000 DMG DMU50v that Ive been using with a 3+2 post that a guy wrote for me. He also wrote a full 5 ax post that creates correct tool tip moves but offsets the tool tip in X about 4" in +...
Ive got a 2000 DMG DMU50v that Ive been using with a 3+2 post that a guy wrote for me. He also wrote a full 5 ax post that creates correct tool tip moves but offsets the tool tip in X about 4" in +...
Looking for a post that will work for this machine. Will pay you if you’ve got one. This machine has the synchronized fourth axis so I would need for axis capability in the post.
Marce, Hi its me again, Looking for a post for a new machine, 2000 DMG DMC103V 840D. Ill pay for a good one.... Thx Mark
Im trying to set the work offset on this machine. The DMC implementation of the WCS on this control is really different than whats in the Siemens manual and also very different from my DMG DMC manual...
I able to load and describe tools. I fixed the problem. WHen I got the machine it had a drive that was acting up/had some bad sectors. I reloaded the NC and PLC archives from the funky drive and that...
Trying to set up and load tools on my new to me DMC103V with 840D control and between the DMG manual, and the 840D manual am missing something. I can describe and load tools in the tool magazine but...
Hi, I just picked up a nearly new DMC103v, only 180 hours, loooong story. Everything works great but the z axis will occasionally drop very slowly after estop is pushed at the end of a run before...
Hi, I just picked up a nearly new DMC103v, only 180 hours, loooong story. Everything works great but the z axis will occasionally drop very slowly after estop is pushed at the end of a run before...
I recently picked up a 2000 DMG DMU103V machine. MMC103 840D control. Machine was never used (long story) and sat for 15 years. I had to reset the NCK and PLC to clear an MDI error (couldnt write...
I recently picked up a 2000 DMG DMU103V machine. MMC103 840D control. Machine was never used (long story) and sat for 15 years. I had to reset the NCK and PLC to clear an MDI error (couldnt write...