Only have old ones from setup number one
I'm having to much fun changing things and making improvements in this thing to have it going for more than a week I've got another one for my everyday...
Type: Posts; User: nztomcat
Only have old ones from setup number one
I'm having to much fun changing things and making improvements in this thing to have it going for more than a week I've got another one for my everyday...
I've got discs that are for that configuration of machine
However there are lots of variables like the deck height total height
Each final save of the disc is machine specific half a mm here...
This is no easy task or to be taken lightly. I've have 3 set ups in my 36 now and to be honest I dont feel as I've achineved alot apart from bypassing the 15k limit the original machine had and saved...
i can supply what you need pulled from a working 322 machine same stops as the 20's for $30nzd each plus postage.
Feel free to send me a private message
Hi I can probably help you out a bit in parts
i used to run a cnc company myself but has had change of ownership now
But I've got all sorts of odds and ends lying about my place and can get...
Hello thanks for the reply somehow I thought you would be the one that replies
sorry I dont have a manual for it this is an extra head to a degree I've take an existing one off and fitted the saw...
Hello
heres the problem i have
I've currently got a biesse rover 336 that i have just fitted with a 5hp hsd spindle that i took off a rover 322. .
What I'm wanting to know is does anyone...
Hello I'm after a little advice
I've got several machines here that I'm about to strip rover 322 and 336 as well as piles of other spare parts.
Where would the best place to sell them be?...
I'm after a motion controller or plc that can do analogue outputs for controlling servo motors
if someone has a kflop that I could borrow to check my setup thatd be great contact me via pm please...
Why are you wanting to change the software
its quite capable if you know how to use it there are a few issues that you need to get used to but you can work around almost anything and if you set...
This is a bit of an open question i'm trying to get ideas and suggestions
I'm wanting to cut 36mm and 50mm chipboard.
Looking at using a 180-250mm saw blade. Theres catshes
I have no...
Looks very similar to what I used a few years ago to make a display room counter.
Was simple enough got a black and white sketch of sand in bmp converted it to dxf. Created lead ins and lead outs...
Hello everyone.
We are the NZ agents for Powtran VSD's Servo Motors and Drives.
Due to the realise of the new POWTRAN Vsd range we have some of the old stock new in box going out the door at...
Hello
Well your posts are a bit back to front. A tad or I'm not quite following them.
You want to use the current servo motors in there now correct? If this is the case is there something wrong...
Hello
The WORK or WORX brand or whatever brand it is they have at mitre 10 are a good unit have a good reputation in the UK hardly anyone here uses them not to sure on collet size.
They are a...
If you pay for flights etc I will come help you. However I'm not even in your country.
What control system are you trying to fit onto it and what hardware are you trying to get evertying to work...
Ah another person in Auckland almost should have guessed.
What do you do for a living at present?
What got you into the scene?
Thats an rt480 code
in the beisse there should be an option to open a converted file which will show it as a drawing a dxf can be exported from this. no idea how you do this on biesseworks can...
Hello Graham
Welcome to the forums where abouts are you based in New Zealand?
Hey guys was tidying up my garage today have a few bits and pieces that are no longer of use to me.
3x Powtran 3phase 380-415v 2.2kw Vsd Units $700nzd each or $1800nzd for all 3
1x Powtran 3Phase...
Hello
This probably isnt going to be of much use o you but I have a fw manuals from 321r 322 and 336L sitting here they al reference the serial connection as an extra module.
There should be a...
So these would be the right library for this card?
Hello I'm sure this will be simple for someone to awnser for me
I have an adtech 8948. Its a 4 axis control card. http://www.adtechen.com/product.php?product=64&t1=1&t2=14
I'm wanting to use it...
Has anyone come across this in the past
A CNC I've just go in my posssion has 3 AC motors as the drive AXIS motors
They are 3 Phase 2kw units with an extra shaft out the back for an encoder....
if you want to try this yourself I wouldnt suggest mach3 it will get to had to deal with 4 routers that run as will as the tool changer in these with offsets all dependent on what tools in and you...
Yes it can be done and interface with existing hardware.
Takes a big learning curve. Every machine has so many things different about them its kind of ridiculous really. Ive been in the same boat...
no longer needed company is all setup now
Hey guys.
Some of you may have noticed in a previous post I mentioned I was setting up a bisuness. Well...
Today I got the company registered Precision Wood Profiling Ltd
This is an...
I'm another lucky person from NZ
Living in the deep south have some sort of fascination with biesse machines got one currently want more.
Have a retro system going on my biesse rover 36 now...
Hey guys
Bit of a stretch but figured I should ask
I'm looking for a bit of temp work on cncs or something similar
I've come from production background with strong electrical knowledge and...