Search:

But now it goes off with the emergency stop button otherwise always on

Haha, now it’s back with nothing working and I can’t get it back to how I just had it semi working!!

Ok I will go give it another try and let you know. I truly appreciate your help I have been messing with this for well over a year. I gave up a couple time and thanks to you this is the closest I...

I can also hear the relay ticking every few seconds

Nor does it shut off with hitting the emergency stop button

Ok so in motor outputs spindle
It was enabled step pin was 14 dot was 15 platelets port and dot port both at one.
I changed both step and for to 16 and now the spindle toggles off and o with the...

410292

410286

NowForever E100 VFD

410276
410278

yes it will not stop with the M5 or the spindle toggle, just winds down for a few second and then back up to speed, like the relay is shutting off and then switching right back, that is what I am...

Any ideas to try and get it?

I am wrong, when I change the vfd to run off Mach3 it comes on and stays on but when you hit the button it just slows down and goes right back to whatever speed is on the vfd

Ok I got it to turn it on, but cannot get it to shut off. It slows down for A few seconds and goes right back to where it was. Any idea”s?

Thanks for that, I will give it a shot when I get home. I appreciate the help!!

yes it has a relay, I know that I need to run a wire from the C and NO pins for the relay but do not know where to put the wires to the VFD

Hi all
Has anyone successfully made their 6040 with a jp-3163b board and a nowforever vfd gotten it to turn on via the mach3 software. I have already tried the videos on you tube and none of them...

ProMakerTec,

Can you explain further I have been trying to get mine working thru the software for well over a year with no luck.

Thanks in advance.

Walt

Hi all,
My limit/home switches were set up and working fine, and now all of a sudden the Z home switch keeps tripping. could anybody offer any help please?
I would also be interested in seeing your...

Carl
Cant help you with the VFD really but as for the height sensor the alligator clip is put on the tool in the spindle. I think you may need a script to assign to the auto tool touch off button in...

Been working a long long time on this and am pretty close but still need help. I can't get the thing to work right. When I hit M5 you can hear the relay click, the motor winds down, but before it is...

Noddy

I have a similar router that uses a JP-3163B board and the same VFD, I am trying to get my spindle to run with Mach3 also. I have had no luck, but was wondering if this might be my solution...

I really hope someone answers you, I have been trying to do the same for quite a while now and got just about enough information that now the spindle runs full speed only no computer or VFD control...

Well still can't get it to work. Now I can't seem to go back to using the potentiometer either. Get an error code E030 which the manual does not really explain that well. Anybody no how to get past...

Russell,
What Mods did you do to your machine did you wire the VFD for computer spindle control by chance?
Thanks
Walt

Do you know what I have to do to wire the VFD to my board? I found a pin marked 0-10V but do not know what else I need to hook up.

Well after looking more on the internet, I figured out the limit switches, but still need help with the VFD.

Thanks

Walt

Hello all
I have a 6040 SX CNC and need some help with limit switches and computer spindle control. I have looked thru the threads but can't find anything with my board really listed .

My board...

Hi all
Anyone with a 6040 able to offer any help? I have one, and the stuff that came with it to set it up is all in metric. I would like to have it set up in english. I know I can switch it to...

I have just installed this screenset, but I don't see the arrows and bullseye part for finding the corner using a triple edge finder. Any help would be appreciated.

Walt

Do I have to have something in ports and pins set because I have tried that, because I have tried using the MDI and get nothing?

Thanks