512,692 active members
4,599 visitors online
Register for free
Login

Search:

Type: Posts; User: JFYM88

Search: Search took 0.01 seconds.

  1. Replies
    7
    Views
    926

    Re: Tool Drum On Arrow 750

    Hi Joe, were you able to fix the problem? I am having the same problem getting a one per tool error, do you know wich relays do you need to change?
  2. Re: Cincinatti Milacron Arrow 1000 Tooling Error

    where you able to find the problem? I am having the same problem
    best regards,
  3. Cincinnati arrow 1000- square at the middle of the screen

    I disconnected my machine for about for 2 months and I just connected and when I powered it up, it do not start running the vickens software, it just show a square on the middle of the screen. does...
  4. Replies
    5
    Views
    711

    Re: Kollmorgen BDS4 206 23 possible failure

    I have not fix it yet, I sent an email to kollmorgen, and they told me I can adjust it from the driver, just like you are telling me. I found the driver's manual and it says how to adjust the...
  5. Re: Cincinnati arrow 1000 needs alignment every time I turn on the machine!!

    Looks like the Limit switch was stuck, the machine is now properly working.
    thank you very much for your time and help!! I do appreciate it.
  6. Re: Cincinnati arrow 1000 needs alignment every time I turn on the machine!!

    I am currently having a problem, hope you can help me with this. Normally when I align the machine, it aligned to the limit switch X=+0.0000 Y=+0.0000 Z=+27.0492 A=0.0000 B=0.0000. something happened...
  7. Cincinnati arrow 1000 A2100 - having problem alignment

    Hi!!

    I am new with cnc machines, I recently bought a cincinnati arrow 1000. Normally when I align the machine, it aligned to the limit switch X=+0.0000 Y=+0.0000 Z=+27.0492 A=0.0000 B=0.0000....
  8. Replies
    5
    Views
    711

    Re: Kollmorgen BDS4 206 23 possible failure

    Thanks for your replay!!
    based on what you told, I looked in to the control maintenance manual and I found a servo adjustments section. here are some pictures of it.
    286180286182

    is this what I...
  9. Replies
    5
    Views
    711

    Kollmorgen BDS4 206 23 possible failure

    I have a kollmorgen BDS4 driver connected to a 5th axis on a Cincinnati arrow 1000, at first a thought that the servomotor had some kind of failure because it was making a noise, I took it out and...
  10. Replies
    3
    Views
    732

    Re: Cincinnati Arrow 1000 Lubricant

    286154
    286156
  11. Re: Cincinnati arrow 1000 needs alignment every time I turn on the machine!!

    thank you very much for your help slowlearner and meckardt55!! I thought something was wrong with it, because when I went to check the machine before buying it, the operator started it and I don't...
  12. Yes!! I am new with Cnc machines. I have done the...

    Yes!! I am new with Cnc machines. I have done the alignment as the operator manual says, and it looses the alignment when I shut it down.

    Do you know what is happening?
  13. Cincinnati arrow 1000 needs alignment every time I turn on the machine!!

    I just bought a cincinnati arrow 1000, I am having some trouble, it needs axes alignment everytime I power the machine, Does anyone know how to fix this problem? any help is appreciated.

    thanks,...
Results 1 to 13 of 13