I have a GC columbo spindle motor I would like to use on my old CNC router, my first problem is I need the 2 control cables for power and function. The second problem is getting a pin out setup for...
Type: Posts; User: redbull1
I have a GC columbo spindle motor I would like to use on my old CNC router, my first problem is I need the 2 control cables for power and function. The second problem is getting a pin out setup for...
I messed with it a little, as I don't have an oscilliscope, its very challenging to make any kind of adjustment on the gain or dampening, took me about an hour of basically just playing with it, very...
My. Retrofitted gerber ar600 is not cutting circles round, I cut a 47" circle for someone, it came out 46 7/8 by 47, then I cut some large quarter circles, customer said those were off, but if I cut...
to start I'm not an electronics expert, so I purchased a Gerber AR 600 cnc router, ran it about 4 months before the main board went bad. A friend with a waterjet company recomended someone that could...