Hi there,
I have the following problem: when I input in MDI A 90 my a axis turns somehow incrementaly in around 3 degree steps. When I just jog my a axis it rotates smoothly...could this be a cv...
Type: Posts; User: taigfraeser
Hi there,
I have the following problem: when I input in MDI A 90 my a axis turns somehow incrementaly in around 3 degree steps. When I just jog my a axis it rotates smoothly...could this be a cv...
Hi,
I´m looking for a 3d CAD model of the taig. There used to be one on The Taig Lathe and Milling Machine, but I couldnt find it there anymore.
Does anyone still have this model?
thanks a lot,...
Hi,
currently I have a taig with gecko 540 and a pretty noisy kress spindle. Im looking for a replacement spindle and so I first had a look on the Kavo and NSK spindles (which are quite expensive,...
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=230274101525&ssPageName=STRK:MEWAX:IT
anybody got one of these? is 18000 rpm enough for doing wax stuff with cutters/engravers? And what do you...
Hi,
guess I burnt one of the four motor drivers on my deepgroove1 board while installing my limit switches. If I now connect a motor to this specific axis the fan connected to the board doesnt even...
thanks- yep it does sound pretty simple, and what about the sherline rotary? The motor is the same,, but I guess its not 20 tpi there?
hi,
guess I need some help with my mach3 motor tuning settings. I have s taig with one of the old custom deepgroove1 controllers. Think it does 8 microsteps and Im running it in mm, so whatt...
thanks for the info. So the air cooled spindle is really limited in continous duty?
And there is a noticeable difference regarding noise? The spindle fan is noisier than a standard pc fan?
cheers...
Hi there,
could anyone pls explain me the difference between the air & water cooled spindles...obviously one uses air and the other one water for cooling, but whats the effect of this. I guess the...
Hi,
I´m trying to install my fourth axis, but it seems to have serious backlash. I can even rotate the frontpart a bit with my hands, where the chuck is attached.
On the webpage they say, there are...
Hi Bob,
Im using one of the old custom made deepgroove1 controller and mach3. I already connected the touch probe and its working really well. But now I also want to add limit switches. They are...
hi, i want to add a touch plate and limit switches to my taig, but im not really sure how to wire them...do i need to wire both of them to ground, and each other side ro pins 14/15? couldnt find any...
just checked the debounce yesterday and I have to say its not really clear to me. There are the two options index debounce and debounce intervall, which of them is the right one? I just tried to fill...
sounds like this could be the solution. I'll check it asap
thanks
Hi there,
got one of the older deepgroove boxes with the custom deepgroove board. Besides the 4 axis output, the guy from deepgroove1 provided me an additional input.
I want to use this input for...