When you generated your G&M code did you select the correct post-processor? If you are using a program like VCarve, you have to select your corresponding machine/manufacturer so that it outputs the...
Type: Posts; User: nwcrosse
When you generated your G&M code did you select the correct post-processor? If you are using a program like VCarve, you have to select your corresponding machine/manufacturer so that it outputs the...
Hi All,
I am in need of removing the platter from my TR160 trunnion rotary. I believe I have a leak at the O-Ring seal. I have removed the bolts securing it from the top of the platter but it...
I have a very new Techno CNC Mini HD router that has been working very well thus far. I am really impressed with the ease of use and the features that it has.
My question is with regards to using...
Located in Des Moines, IA.
Took the cover off of the Z axis motors, they have the same technical markings as the others.
Superior Electric
Slo-Syn
Type: m063-CS06
Volts DC: 3.36
Amps: 2.9...
I just realized that it looked like I was referring to the software side of things when mentioning how I assumed the Y and Z were the same. What I meant was, I removed the panel that covers the...
I was thinking about that as well. Since my box was diagnosed as having no problems, I could probably save a little bit of money and re use some of the things that I have.
Currently, the...
Thanks for the info, I've read through that thread and a bunch of others. I guess what I was looking for is more specific to the Gecko 540 in relation to the prolight and settings within mach 3. I...
It is a "Light Machines" proLight 1000, which is sold and serviced by Intelitek just to clarify. It's an education based mill but apparently has a lot of potential.
Hi all,
I am brand new here and am really excited to have found such a great resource for information. I am a high school teacher that has an Intelitek Prolight 1000 mill. Recently, the...