any expert can help to change the Mori Seiki machine interface to English.
Type: Posts; User: Hakam
any expert can help to change the Mori Seiki machine interface to English.
Need experts advice for a couple of issues for Okuma 45VAE, its controller OSP 700M
I connected the machine few days back to make ready for action, hence, i am having trouble with few points
1-...
do anyone have a spindle manual, need to take out the spindle motor. looks the thermostat inside the motor defected. I am receiving continuously Alarm 1057 A Spindle Motor overloaded.
I replaced...
Unfortunately, DMG Mori are not cooperating, they are not willing to support. I approach DMG Mori France, DMG Mori NL and DMG Mori ME. no one wants to help me even i send Email to Mother company in...
the Parameter 3102 is set to zeros in all Bits, but the interface still in Frensh.
495724495726
I checked parameter 3102 all bits are set to 0, hence most of the interface screens still in Frensh.
any suggestions
Need experts advice for a couple of issues for Okuma 45VAE, its controller OSP 700M
I connected the machine few days back to make ready for action, hence, i am having trouble with few points
1-...
thank you, appreciate it
will try this and see if it works, if you have same machine and manuals available for you. I am ready pay for those if you can share a ecopy.
could not find the controller type or even the serial number on the back of he monitor, I need to open the cabinet maybe to check inside
unfortunately, Machine without manuals or any book, this is what makes it harder to manage it :(
Hi all,
need experts help, I purchased a preowned 2007 Mori Seiki Lathe with MSX-504III controller, its interface in Frensh .
any expert can help me to change the language to English.
Dear Experts
any one can help with the machine problem, I observed that the servo cards power is not lighting as usual
can some one help to diagnose the problem
Dear Experts
we need your help to identify the problem behind this error, I checked the servo cards and found seems to be no power
the led on the cards are not lighting neither green nor red
hi any one have an idea about this error and what we can do to solve it
Dear all
any one can help with the machine me error?
Dear All
still I did not solve the mentioned alarm in my machine, it kept aside due to this now quit long
any body can help with this error
Dear All,
yet I did not solve the problem with my machine,
any one please can help ?????
Thank you for the feedback,
no air pressure to this machine is connected, where the torrent clamp is disabled i suppose since long
Definitely I have checked all the Emergency buttons and door...
Dear All,
i have a problem with the Colchester 2000l CNC, the machine boots up with the error 600-06 and "not ready" is flickering on the left side of the screen, no specific alarm number observed...
Dear All,
i have a problem with the Colchester 200l CNC, the machine boots up with the error 600-06 and "not ready" is flickering on the left side of the screen, no specific alarm number observed...
Okhanan;
Is your problem is solved or not?
Greeting Okhan;
do you have the parameters fot the colchester 2000L lathe, i have the machine also and i reseted the computer by mistake.
I dont have a backup for the Fanuc OT...
Dear Okhan.
This message is cased bay many reasons, but what you can check is the Fuses and the circuit breaker inside the Main Fanuc system Box at the back side of the machine.
Mostly one of...
Hi all,
I reseted the Fanuc Sustem for the Colchester 2000 CNC and i dont have a backup.
the machine is having a Fanuc OT 0m/A Control
If any body have the parameters for the machine please...