the ones in blue look like they are for tapping 1/4" to it should be around 0.19", Also the antibacklash nut housing is only for acme nuts if you are using them, if you ate using dumpster delron nuts...
Type: Posts; User: joecnc2006
the ones in blue look like they are for tapping 1/4" to it should be around 0.19", Also the antibacklash nut housing is only for acme nuts if you are using them, if you ate using dumpster delron nuts...
Try this link.
http://www.joescnc.com/JoesCNC2006/Joes_CNC_Model_2006_R-2.zip
He will probably glue aspoil board on top of that and then when it gets worn resurface it many times, then when it gets to low, resurface then add another spoil board on top and do a final surface.
good to hear.
You may want to look at the tensile strength, I think it may be lower than HDPE but in this application may be just fine. Also I believe that some of those materials is oil impregnated for self...
Some have done it but the acrylic can be brittle. I had made some of my hybrid out of acrylic and it worked.
It is bolted, and shown in my forums and plan drawing.
In my forums once you have access there are template files to download.
Yes I am, Can you resend or forward the email?
Thanks
Edit: Sorry it was a message here, Its better to send me email, But I just responded to your PM.
It is not just a regular e-chain this is an open e-chain, meaning you can flip open each link open and place the cable inside then snap it closed, I have found this allot more useful than trying to...
The one with the red buttons are from cncrouterparts.com, that is also when we get the rack and pinion kit and some get their electronics from there also helps save on shipping.
There has been quite a few build done, I just been a little busy to post them here but I will try my best.
I always like seeing the machines move for the first time.
...
can you send again? i get allot of email everyday. I try and believe i answer all of them but sometime i do miss it.
Just mention its a reply from cnczone also.
1/8" end mill for roughing pass
1/16" Ball nose for finish pass
Same Size as Previous Test
271710
Rough Pass
271712
Final Pass
Wanted to try a little 3d relief on the Titan.
6061 Alumn.
1/8" Ball nose
1% step over
the piece cut is 3" tall
Took a little over one hour 60ipm all axis
No Roughing pass.
Next Will be a...
Here's a couple of videos of a Titan CNC making some pistol grips.
https://www.youtube.com/watch?v=uPfbUjOW2vI&list=UUckIhSczzeyLmQAiUHOqSHQ...
Please send am email, Policy here is not to discuss pricing on the zone.
Joe
The first Hybrid machine was a leadscrew version, in some areas (cold weather) he anti-backlash nuts would contract and bind when cold. and then the machine went to rack and pinion which was simpler...
Here is one which a member modified the 4x4 hybrid machine, he used just aluminum angle layed down for the bed and when he want to use a router he uses some mdf ontop.
Note he also changed the...
you can also see joescnc on facebook.
https://www.facebook.com/pages/Joes-Cnc/663335943704223
Surfacing the Titan Desktop Bed. I Can not see any witness lines. after completion of build the bed was off 0.005" left to right and 0.003" front to back. this may be the differences in the MDF and...
I should have clarified, the files I gave to Bill was only to accomplish the 12 extended travel, all the other files came from Hoss2006. His DVD's that I and Bill both bought.
Bill (Makers Guide) based his build from the files I sent him, My G0704 has 12" of travel but seldom use it usually stay in the 8" range.
Here is my build log.
...
I am going to be building another one for sale. and post pictures.
Installed an X2 style spindle on my machine. I decided to remove all electronics from the head and relocate them, Also painted the head I think it looks cleaner.
Mind you this is not the norm for...
Joe's CNC "TITAN Series" 24x24 Desktop version.
20mm linear guide rails and bearing blocks with 4 points of contact recirculating balls bearings for tighter fit.
C7 1605 Ballscrew/Ball Nut on X-Y...
there are a few guys running the ess on my forum you can ask them also.
I would email Warp 9 and describe the steps you did and he can prob. help.
We just need a little more info like Ger21...
One of a few More Machines Built. you can search youtube and find many of them.
https://www.youtube.com/watch?v=wbmxlbIpQh4
Mike's Modified Evolution with unistrut base.
248288
Been a little while since posted, we have many new builds of the standard evolution machine and also some large versions.
John's 13'x6' Evolution.
https://www.youtube.com/watch?v=eab2tHYSq1o
...