thank for your reply
I knew i had to change these parameters. But ,on previeus version of 0I control, i was able to see the parameter 9900 - 9999 and now i'm unable to see them. They are protected...
Type: Posts; User: sylvain
thank for your reply
I knew i had to change these parameters. But ,on previeus version of 0I control, i was able to see the parameter 9900 - 9999 and now i'm unable to see them. They are protected...
0= RS-232
1= RS-232
2= RS-232
3= floppy drive
4= SRAM memory
5= Hard disk and FTP
conversational does not need to know the G code to make it work.
Standard is in G code
Hi
You can have G54.1 to G54.48 and G55,G56,G57,G58 and G59
Did your post insert '' N '' or '' n ''
if '' n ''
the control wont see it
G97S1000T0707M3
G0X1.1Z-0.100M8
G1X0.670F0.050
G76P030060 definition(P03=free cut 00=chanfrain 60= angle du filet)
G76Q30 definition(Q30 derniere passe= 0.003)
G76X?Z?P260Q70F?...
Hi!
Did you change your channel to 4 ?
0= RS-232
1= RS-232
2= RS-232
3= floppy drive
4= SRAM memory
5= Hard disk and FTP
I need to install a 4th axis on a Fanuc 0I-MC control. Ineed to change parameter 9900 but i'm unable to see that parameter anymore. Does anyone know how to be able to see these parameter?
Best...
parameter 15 bit 7 should be 1
Hi, it's the first time for me in a forum. But maybe you can help me. I need the acces to optionel parameter on a new Fanuc 0I , but i'm unable to see 9900 - and up. i need to install a 4th axis in...