Search:

I am assuming this is a OSP 5020 control, if so then the servo proccessor info is not used so the code after the alarm won't help us much. As stated earlier you are going to have to look at the...

The overload relay on the drive unit for the axis is tripped. It may be as simple as the breaker itself on your drive unit is tripped, check this to see if it is tripped. Is this problem happening...

Boy this is an old thread but here is a quick update for those interested. KGKI no longer exists. Everything is now done out of Okuma America in Charlotte NC. The Howa name is no longer on the...

They still do. The Captain series lathes are assembled there.

Agree with BudgieW, the multis has come a long way since its inception. Now has full functioning 5 axis and most bugs have been worked out. I don't know about the service with your other choice but...

Just so everyone knows, PayPal is a ripoff and their security sucks. Don't trust it guys. Its only a matter of time before you get bitten if you use it. We did a lot of selling on payPal for a while...

No offenses were meant to be taken. My appologies.

G codes and M codes would be the only thing that may compare between the two. These are two completly different controls with little in common.

G04 is the dwell code and F is the time, i.e G04F2 for 2 seconds. There is no p for dwell on OSP.

You understand correctly. There is a Battery/Maintenance disc that resets the control data for the battery change. The service rep will have to do this as there is a procedure required. You will get...

And what did we learn from this,,,you bought from CHINA. When will people learn that nothing good comes from China so learn from the mistake. What did you save in the end, nothing. Everything that...

As mentioned by some of the others Keep It Simple. Check your inputs and outputs in check data. First check and see if you have either the chuck closed or open input being made, one or the other...

You stated that you used 1000 volts for the test. Fanuc recommends using the rated voltage of the motor if possible. I.E. if your motor is 220 v then use that insted of 1000 v. You don't need to use...

MysticMonkey is correct. I would highly suspect your PSM. Its awful strange that Fanuc fixed one problem and another has crept up that indicated possibly the same trouble area. Good luck

Definately go Hydraulic. You would be suprised at what you can find on the used market now days for not bad prices. If at all possible go with Cincinnati even if it is a little more, you will more...

Just out of curiosity i am assuming that you get these boxes already put together. If this is not the case then do the cutting before the boxes are assembled. If they do come assembled then maybe the...

As the other guys have stated check the leveling first. You have said this is your first post but you didn't say what your machine exp. is. If you know the proper way to level then do this first....

A good used Trumph 2500 watt laser will run you probably in the neighborhood of $150,000. Zax15uk is absolutley correct if you are only looking for 400 watts or less don't waste your time and try a...

If you are talking about 1/4" steel you won't do that with anything mentioned here. You will need at least a 2500 watt laser to do it effectively with any speed at all but then you can go up to 1/2"...

Like underthetire said you will really test someone on the 3000 control. You will probably be lucky if you find someone who knows it well. Keep in mind for the future that i don't think Okuma even...

I have all the procedures for backing up and restoring everything including ladder. Not a big deal at all. Let me know an e-mail and i can get that to you. Keep in mind as you probably already know...

Keep this in mind when using PCMI cards with Fanuc. If you get them with to much memory you will have problems as you have already found out. Believe it or not the Fanuc controls don't like much...

In my humble opinion Bridgeport, Hardinge, and Haas should not even be on this list. I have worked on most everything cnc and have worked for an Okuma dist so i have good all around knowledge. I...

You may think this is rediculous but it sounds like your belts may be to tight, if the axis is drivin by belt. If the servo belts are changed or the motor is replaced or swapped and you get the belts...

DaveDoesIT is correct. I know Trumph lasers which are top of the line and a new one in the 4000 watt range would tear 1.5 million all to pieces. However with this laser you will do what ever you want...

This is for "howd", if you are still reading this post. I have the procedures for setting these home positions including the reteach procedure for the turret. It may be as simple as the way you are...

Like Algirdas said, we need more info on the problem. I have some manuals and procedures for this control. Let me know an e-mail and after the holiday weekend i will see about sending them to you....

948 TFP alarms are almost always bad fiber optics(orange). It could be the transmitter or reciever on one of the boards(i.e. TFP Board) that the fiber optics go to are bad but most likely the fiber...

A lot of times this will indicate the orange Double fiber optic from the spindle drive to the FUB boards is bad. If i am not mistaken i think the boot sequence goes thru the spindle drive first so if...

If your alarm is indicating tailstock overtravel then you need to find the input for this switch in your electrical prints and look in the inputs on the machine and see if it is made or not. It could...