Sir,
Pls mail me the BNC 34 T parameters to [email protected].
My mcn is dead .
pls help
Type: Posts; User: raokmk2003
Sir,
Pls mail me the BNC 34 T parameters to [email protected].
My mcn is dead .
pls help
hi pls mail me the MIYANO BNC-34T parameters as i lost them and mcn is dead.
mail id [email protected]
I GOT ALL THE THINGS WORKING.
SUDDENLY TODAY MORNING, ALL THE BACKUP GOT DELETED.... DONT KNOW WHY...
BUT ENTERED ALL THE PARAMETERS AND STILL GETTING THE EX1047 ERROR.
HOW TO CLEAR THAT.
PLS...
I HAVE THE PARAMETERS FOR MORI SEIKI MV 40 MF6 CONTROL. MAIL ME FOR THE SAME
i do have for MV40B
please contact me at [email protected]
facing a problem with G16 code ( polar coordinates).
When Gcode G16 is input along with program it gives an alarm 010 improper G code.
in the manual it says its option code which is there fr MV 40B...
Finally Got The Machine Running, with Front Door interlock working. but for every M30/M02 the door key has to be removed and inserted again.
Thanks to underthetire, kittiwat and all the group...
Okk sir
Ladder pic of which address.
Yes sir.. u r almost there.
We traced into ladder and found that the work end memory is not cleared. Hence it is giving EX 1024. DOOR MUST BE OPENED ONCE.
Pls suggest how to clear the work end...
Its not just on power on. But the alarm just pops up when i press the cycle start in mem mode.
Till now i have not run my mcn on auto or mem mode.
Pls help my mail id is [email protected]
Hi
Seeking more help.
Iam not able to solve the EX1024 ERROR MSG. Pls anybody guide me through.
My machine, though smart enough... iam not able to run it.
Okk. I can understand. Thanks for the reply.
Can i talk to you. Pls mail me ur contact number @ [email protected]
Hi
Is that, u mean that bypass cannot be done...
Thank you underthetire for the advice.
Done this but still getting the error.
I have seen from your profile that u are a senoir level service engineer for mori.
Pls help me set the B3 level safety...
Hi
Just imported a decently used machine from germany to india.
Installed the machine, checked all the conections and powered up.
Machine responds for all commands in mdi mode. But when set in...
Dear Rishikesh,
I really require the Fanuc OTC maintanance manual.
i have a Ikegai TU25 with fanuc OTC. iam now running the machine with other machines parameters, but with lots of problems....
Hi All
I have an IKEGAI TU25 Lathe with a Fanuc OTc control - build date around 1997 - My battery backup went out and I lost all parameters. The lathe was just put into the shop and we have no copy...