Having serious issues with our ST20 SSY, im running a sub program, which functions perfectly fine. My issue is that once it finishes the first part, calls up the new offset via a G52, makes the...
Type: Posts; User: tyguidry
Having serious issues with our ST20 SSY, im running a sub program, which functions perfectly fine. My issue is that once it finishes the first part, calls up the new offset via a G52, makes the...
Yes! hit the nail on the head! that answers my questions exactly. Thanks a lot:wave:
Hey all, banging my head against my machine over here trying to make multiple parts without have to re-enter a work offset every go around....pretty straight forward, right?
Essentially what I...
ok got the linking paramters figured out. depth of cuts are better. now, the slow is .140, and since im using an 1/8" flat endmill, and its cutting along one edge only, that leaves .015" left over....
nevermind! *somehow* figured it out on my own! now im just having a problem with it not recognizing the bottom of slot. its milling clear through the bottom of my part:confused: got a quick fix for...
ok, definitely made a bit of headway. There were some very small areas in my radius' that i missed in my curve selections so it was breaking up the overall "loop". Now my issue that when I select the...
I drew it in solidworks, saved it as an .iges and I have made another level of the part and incorporated the above directions accordingly per another thread I worked my way through. Is it safe to say...
I followed your instructions and it generated a toolpath for only one face of my slot. and it lead in/out through my part:confused:.....now im trying to add as many chains as necessary for it follow...
I drew the model myself in solidworks and yes, the entire slot is parallel, and all corners have a radius. ill give that a shot in the morning, thanks for the response.
MC noob here. Trying to generate a toolpath for this slot that works its way around the inside of the boss of my part. When I select slot mill I get an error message that says "Boundary must consist...
Banging my head against the wall trying to set a y axis tool offset on a Haas ST20-SSY. im sure the solution is right in front of my face but I can't figure it out for the life of me.
what're the...
Hand writing a pretty basic live tooling program, this is my first time diving into face working and theres a code in the HAAS workbook sample program that has me curious/scratching my head. any...
:wave:Title pretty much sums its up! The skinny on my background is that im just getting into writing basic G code for lathe. Im a student in a manufacturing tech program. Started doing millwright...